[un-smooth lines that lift during Fill]

Used the atomic pull method and the printer is now running completely fine!

Not that many print hours so the Teflon coupler is still in full working order

 

[un-smooth lines that lift during Fill]

Hi guys

I can't seem to work out whats going on here with my print. I've levelled my bed a huge amount of times so the first layer has gone down quite well but as the fill starts to go on the printer makes a rough layer over and over again.

The photos show the finished print as well as a print that has been taken off mid way through to show how it builds it up.

I've been able to get this print to a high standard before as well as on a quick speed but now my printer is loosing its quality.

Nozzle temp 210 Bed 70

first layer 20mm/s then 50mm/s

0.1 layer height with 50% fill and a nice 3 line Brim