sohaib01

Yup i have had printed many parts at max height thats not an issue. Those parts were smaller in area only their length was maximum as of printer z-axis so they took comparatively lesser time to print and printer didn't stop. But now when I am printing this part with maximum x,y and z axis my printer could print on the bed, it stops printing after about 15-18 hrs of continuous printing. The total print time of my part is around 60 hrs. So I am guessing that may be the printer is hard coded to stop printing after a specific time? Has anyone ever printed a part that took around this much time?

I am having the same problem with my printer. Also that after 16 hrz of printing I paused the print to give printer sometime to cool down if that is what causes the printer to stop but the printer stopped automatically when i resumed the print after 3 -4 hours. PLease help us out with it.

Here is another picture of bad print

ker printer that while printing a layer, it misses a part of print as if it was intended to miss, and it is kind of symmetrical. I am attaching pictures for better understanding, the prints in pictures are 2 -3 layers thick because i stopped the print when the problem occurred. I am using PLA filament, with nozzle temp 210 and bed temp 60 degrees Celsius. [/media]