jgates
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by jgates
-
-
Thanks for the reply. They're quite a bit more substantial than any stringing that I've had in the past. They need to be sanded/filed off. Retraction is on. I tried a little hotter than 210C, maybe I'll try a little cooler.
Thanks,
jg
-
The UM2 worked perfectly for several weeks, and then I had a nozzle clog. It seems to be cleared (atomic and then, ultimately, a hot-end disassembly). The prints are having some gaps, some sticking issues (seem to be solved after going to 70C for bed), and these weird little diagonal staircases coming out of the sides of the prints.
https://www.sugarsync.com/pf/D333436_95042359_6911064
https://www.sugarsync.com/pf/D333436_95042359_6911076
Prints seem to be pretty good (not as good as original) when there are no lifts in the print - big, continuous objects.
Has anyone seen this before?
Thanks in advance!
Josh
Weird "flyaways"
in UltiMaker 3D printers
Posted
The issue's much better after switching to ColorFabb black, so that's good. The temp. didn't seem to make a huge difference, but it's all fairly manageable at this point. ..now if I can just get big prints not to pull up, I'd be all set!