3DRyGuy

In case anyone is watching this thread for a solution, I found it. The saved GCode files from Cura must be save to the UNENCRYPTED FOLDER of the SD Memory card. You can access that folder on the printer. All issues were resolved. I knew it had to be something easy.

Here is my Slice log from one of the files. Running: C:\Program Files\Cura_15.04.2\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode= -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s gcodeFlavor=1 -s postSwitchExtruderCode= -s retractionSpeed=40 -s filamentFlow=100 -s infillOverlap=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=6 -s initialLayerSpeed=20 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s supportEverywhere=0 -s filamentDiameter=2850 -s initialLayerThickness=300 -s supportAngle=-1 -s fanFullOnLayerNr=2 -s extruderOffset[1].X=18000 -s extruderOffset[1].Y=0 -s layerThickness=100 -s endCode=M25 ;Stop reading from this point on. -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s skirtMinLength=150000 -s objectSink=0 -s retractionAmount=4500 -s skinSpeed=15 -s skirtLineCount=1 -s startCode= -s skirtDistance=3000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=150 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s sparseInfillLineDistance=2000 -s insetCount=2 -s downSkinCount=6 -s multiVolumeOverlap=150 -g 49674 -m 1.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,1.0 -s posx=0 -s posy=0 $ Cura_SteamEngine version 15.04.2 Copyright © 2014 David Braam Reading mesh from socket with 19716 vertexes Loaded from disk in 0.016s Analyzing and optimizing model... Face counts: 6572 -> 6568 99.9% Vertex counts: 19716 -> 3270 16.6% Size: 41.147000 36.194000 3.809000 vMin: -20.573000 -18.097000 0.000000 vMax: 20.574000 18.097000 3.809000 vMin: 0.000000 0.000000 0.000000 vMax: 41.147000 36.194000 3.809000 Matrix: 1.000000 0.000000 0.000000 Matrix: 0.000000 1.000000 0.000000 Matrix: 0.000000 0.000000 1.000000 Optimize model 0.031s Slicing model... Layer count: 36 Sliced model in 0.265s Generating support map... Generating layer parts... Generated layer parts in 0.094s Generated inset in 0.405s Generated up/down skin in 1.077s Wrote layers in 1.78s. Wrote 2.7 kilobytes. Total time elapsed 3.67s.

Yes. I am saving the GCode to the SD Card that came with the Printer. I find it interesting that if I pull in the working object from the SD Card (like the Ultimaker robot) and I resave it with the default settings in Cura that it now will not print.

UM2 has been selected and UltiGCode has been selected.

I just purchased an Ultimaker 2 Extended and downloaded the Cura 15.04.2 software. I also updated the firmware of the printer after I downloaded the Cura software. I have been successful printing every object from the Memory Card shipped with the printer. My Problem comes when I try to print my own a solid works file (.STL). Anything I save from the Cura software (including resaving the good files from the memory card) gives me the setting error and the best the machine will do is raise the plate and send the head to the full forward stop. I have tried quickprint settings, various Expert settings, different Gcode Flavors nothing works. Any advice? I must be missing something.