[This file will override machine setting with setting from the slicer]

In case anyone is watching this thread for a solution, I found it.

The saved GCode files from Cura must be save to the UNENCRYPTED FOLDER of the SD Memory card. You can access that folder on the printer. All issues were resolved.

I knew it had to be something easy.

[This file will override machine setting with setting from the slicer]

Here is my Slice log from one of the files.

Running: C:\Program Files\Cura_15.04.2\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode= -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s gcodeFlavor=1 -s postSwitchExtruderCode= -s retractionSpeed=40 -s filamentFlow=100 -s infillOverlap=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=6 -s initialLayerSpeed=20 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s supportEverywhere=0 -s filamentDiameter=2850 -s initialLayerThickness=300 -s supportAngle=-1 -s fanFullOnLayerNr=2 -s extruderOffset[1].X=18000 -s extruderOffset[1].Y=0 -s layerThickness=100 -s endCode=M25 ;Stop reading from this point on.

-s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s skirtMinLength=150000 -s objectSink=0 -s retractionAmount=4500 -s skinSpeed=15 -s skirtLineCount=1 -s startCode= -s skirtDistance=3000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=150 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s sparseInfillLineDistance=2000 -s insetCount=2 -s downSkinCount=6 -s multiVolumeOverlap=150 -g 49674 -m 1.0,0.0,0.0,0.0,1.0,0.0,0.0,0.0,1.0 -s posx=0 -s posy=0 $

Cura_SteamEngine version 15.04.2

Copyright © 2014 David Braam

Reading mesh from socket with 19716 vertexes

Loaded from disk in 0.016s

Analyzing and optimizing model...

Face counts: 6572 -> 6568 99.9%

Vertex counts: 19716 -> 3270 16.6%

Size: 41.147000 36.194000 3.809000

vMin: -20.573000 -18.097000 0.000000

vMax: 20.574000 18.097000 3.809000

vMin: 0.000000 0.000000 0.000000

vMax: 41.147000 36.194000 3.809000

Matrix: 1.000000 0.000000 0.000000

Matrix: 0.000000 1.000000 0.000000

Matrix: 0.000000 0.000000 1.000000

Optimize model 0.031s

Slicing model...

Layer count: 36

Sliced model in 0.265s

Generating support map...

Generating layer parts...

Generated layer parts in 0.094s

Generated inset in 0.405s

Generated up/down skin in 1.077s

Wrote layers in  1.78s.

Wrote   2.7 kilobytes.

Total time elapsed  3.67s.

[This file will override machine setting with setting from the slicer]

Yes. I am saving the GCode to the SD Card that came with the Printer.

I find it interesting that if I pull in the working object from the SD Card (like the Ultimaker robot) and I resave it with the default settings in Cura that it now will not print.

[This file will override machine setting with setting from the slicer]

UM2 has been selected and UltiGCode has been selected.  

[This file will override machine setting with setting from the slicer]

I just purchased an Ultimaker 2 Extended and downloaded the Cura 15.04.2 software. I also updated the firmware of the printer after I downloaded the Cura software.

I have been successful printing every object from the Memory Card shipped with the printer.

My Problem comes when I try to print my own a solid works file (.STL). Anything I save from the Cura software (including resaving the good files from the memory card) gives me the setting error and the best the machine will do is raise the plate and send the head to the full forward stop.

I have tried quickprint settings, various Expert settings, different Gcode Flavors nothing works.

Any advice? I must be missing something.