[Ideal settings for Cura]

 

But as you can see in the image, the top part was still not covered, it's still hollow.

 

Maybe a missing tickmark here?

 

Thank you everyone for your help! Tinkergnome, you were right! the first tick was missing. Tried the same print and it came out perfectly!

[Ideal settings for Cura]

I changed the "Bottom/Top Thickness" to 1.2 and layer height was set to 0.1. SO i should have got 12 layers.

But as you can see in the image, the top part was still not covered, it's still hollow.

How do I tackle this problem?

[Ideal settings for Cura]

Hi all,

I'm new to 3D printing hence am doing a lot of trials.

I've noticed that I have changed some settings and now when I am printing something, the top layer isn't getting printed properly. It is very thin and weak.

So I wanted to know, what are the default settings or ideal settings for a regular print. I understand that the settings will vary from print to print, but some basic guidelines will be really helpful!

Thank you in advance!

Best regards,

Siddhartha