vanias78
-
Posts
12 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by vanias78
-
-
1 hour ago, Oliveros said:
3MM, not sure if that would work for you or not but it does 100*C
no doesnt fit to my printer i think. thank you.
-
1 hour ago, tinkergnome said:
No other material properties are important?
Where are you located (shipping rates)?
Another example that prints at lower temperatures:
https://www.extrudr.com/en/products/catalogue/green-tec-anthrazit_2174/
Thank you . i am in greece . I dont care for other properties , most of items i print is for fishing and drones. My problem is when i forget pla on the car in sunny days i found them melt. Thats the reason i need something more resistant.
-
8 minutes ago, AndersK said:
wow very expensive. 180 euros.. thanks anyway.
-
Hello i am interesting for fillaments that have more tha 90c resistance after prinnting. Diameter 2.85 i am going to use them with Ultimaker 2+ extended so will be better to have printing temperature <=260c
-
-
Ι used 0.2 height layer 30mm/sec speed. 0.4 nozzle olson.
-
I tried with colorfab original setting to print on my Ultimaker 2+ and after 6-7 layers clogging and destroy everything. I used olson nozzle as recomended. Does anyone has more details settings for this material ?
-
-
Last days tried to print with this high temperature filaments as i need something to can handle my cars temperature without melting. Unfortunatlelly the prints from this material comes out very sensitive and break very easy. Maybe the problem is i use 260C and maybe need more (280c). Does anyone know away to print right with this material or a way to use more than 260 on my ultimaker 2 extended + ?
I print with recomended from colorfabb settings (except temperature use 260 and they need 250-280)
Thank you.
-
-
>90c temperature resistance fillaments.
in Materials & profiles
Posted
yes i will try it. general i order every filament people suggest me here to test it.
I tried ABS in past and i felt it was very difficult for me to use it. Most of the parts goes with problem in corners.