Papabear1609

Hi there, I would like to know a bit of info regarding the PLA material. It often breaks up in the tube and causes problems with the feeding of the material, Is there a better material to use that is more consistent and just of a better quality? Any information is greatly appreciated. Thank you

YES!! unchecking that box did the trick!! Thank you very much!! Great community this is! very much appreciated!

It looks fine in Cura, it is also centered on the build plate, i have also chosen the ultimaker 2 as the machine so that is correct. I have unchecked that box now and will try to print.

And yes it is the latter, it is printing the entire model there.

Where do i find the lines of the gcode? sorry i am new to this and dont have much experience. thank you for your help.

I am using an ultimaker 2 and using version 15.04.2

Hi, can somebody please help me. Ive made a design i would like to print in spaceclaim, i then save the file and open the .stl in cura which i then save to the sd card but when i try and print it, the nozzle starts printing right on the corner of the machine. In cura it shows that the model is in the centre of the printing area, why does it not go into the centre as shown in the cura program. This is not the first time ive had this issue. WHY is this happening?? Help will be greatly appreciated. Thanks in advance.