rasti666
-
Posts
10 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by rasti666
-
-
This will help you with many things, including your elephoot
http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide
on a second try i put the fans on 35%
bed on 50C
and increase a little bit the height of the nozzle.
it works better but maybe it be just some Luck
-
in my opinion the most direct approach to reduce them is smaller first layer height like 0,2 maybe 0,1 mm. But that needs a perfectly levelled bed.
i am working with 0.1 first layer.( on cura)
there is a way on cura that i can change the height between the layers ? ( all of them supposed to be the same )
-
-
-
What if you print it just like you position it on your last photo?
That could work.
yes it works, but the quality is poor.
you can see by yourself, the support was hard to remove and left the side not really soft
-
What material are you using? This will make a difference to the answer.
yes ! i forgot ..
PLA !
and i used the settings of the UM2+ for PLA
often change the Fan Speed manually.
-
Hello everybody!
i am having some troubles triyng to print this part.
https://www.dropbox.com/s/wzj37tyk6kn0f81/Zipper.STL?dl=0
i tried differents ways ( upside .. with and without support whit brim... )
if someone have same tips .. it could really help !
thanks !
The BEST settings for .stl file ( solidworks )
in Improve your 3D prints
Posted
Hello all !
I want to know which are the best settings of .stl format for an Ultimaker 2+
i am asking about Deviation and Angle, should i use the default of Solidworks ?
thanks !