HELP!
I need to print a few ruberised bits for work and bought 10M of Ninjaflex.
I cannot get it to print at all! Not even extrude through the nozzle! It just bunches/Stalls in the bowden tube.
Settings are.
Nozzle = 240C
Baseplate = 65C
Feed 110%
Speed 20
Retraction is off.
I stripped the nozzle and completely cleaned it. I can see clear daylight through the extrusion point and it prints perfectly with PLA and ABS.
I cannot figure out why the flex isnt extruding?
:(