busch3d
-
Posts
9 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by busch3d
-
-
Es war das FW Update. Ich hatte zwar eine neuere FW drauf, aber die scheint trotzdem Probleme gemacht zu haben. Das Update brauchte drei Versuche. Es läuft nun aber mit LED on/off.
Manchmal kann es so einfach sein..
Danke
-
Wie alt ist Deine Firmware? Es gab einen Fehler, der das M42 Kommando betraf, aber das wurde vor fast zwei Jahren (mit Version 15.04.4) korrigiert.
Hey, ich glaube das letzte Update habe ich Anfang des Jahres gemacht. Von dem Bug, dass das Kommando nicht interpretiert werden konnte, hatte ich gelesen.
Ich schaue mal nach der FW.
Einfach per Cura updaten oder muss das für Octopi anders laufen?
-
Octopi updatet sich immer brav selber. Kann ich die Firmware vom Ultimaker 2+ immer problemlos updaten oder sollte ich warten...?
-
Hey, klappt leider nicht.
Der Start sieht nun so aus:
;FLAVOR:RepRap
;TIME:5880
;Filament used: 1.77757m
;Layer height: 0.15
;Generated with Cura_SteamEngine 2.5.0
M190 S60
M104 S210
M109 S210
G21 ;metric values
G90 ;absolute positioning
M42 P8 S255 ;LED ON
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G0 X20 Y20 F7200 ;bring extruder to the front
G1 Z25.0 F7200 ;move the platform down 25mm
G92 E0 ;zero the extruded length
G1 F200 E25 ;extrude 25mm of feed stock
G92 E0 ;zero the extruded length again
G1 F7200
M117 Printing...
;LAYER_COUNT:99
;LAYER:0
M107
G0 F4500 X99.223 Y161.474 Z0.27
;TYPE:SKIRT
G1 F1800 X99.672 Y161.247 E0.00745
...
Er wärmt die Bodenplatte und den Druckkopf auf, sobald die Temperaturen erreicht sind, stürzt der Drucker ab. Die Lüfter gehen aus (auch die vom Extruder) und es hilft nur ein Neustart. Auch Octopi verliert die Verbindung.
-
Hallo liebe Ultimaker-Gemeinde.
Ich habe seit langer Zeit einen UM2+ mit einem Octopi am laufen. Es klappt alles hervorragend. Nur möchte ich beim Start die LEDs an und beim Ende wieder ausschalten.
Die Startsequenz in Cura ist:
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G0 X20 Y20 F7200 ;bring extruder to the front
G1 Z25.0 F7200 ;move the platform down 25mm
G92 E0 ;zero the extruded length
G1 F200 E25 ;extrude 25mm of feed stock
G92 E0 ;zero the extruded length again
G1 F7200
M117 Printing...
Am Ende
M107 ;fans off
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G21 ;metric values
G90 ;absolute positioning
G28 Z0 X0 Y0 ;move Z and X/Y to min endstops
G91 ;relative positioning
G1 F300 E-10 ;retract the filament
M84 ;steppers off
G90 ;absolute positioning
Zum Steuern habe ich den Befehl
M42 S0 ;turn led off und
M42 S255 ;turn led on
gefunden.
Den habe ich jeweils ans Ende gestellt. Drucke ich mit damit knurrt de Drucker nur und es gehen wieder die LEDs an, noch passiert etwas anderes.
Ich bin einfach blind und sehe den Fehler nicht - kann mir bitte jemand helfen?
Liebe Grüße
-
Gibt es einen Befehl um die LEDs des UM2+ mit Octoprint zum Drucken einzuschalten? Sonst werden die Zeitraffervideos nachts doch sehr dunkel : )
-
Sorry. Hatte die anderen Einträge nicht gesehen - habs gefunden.
-
Hallo liebe Ultimaker-Gemeinde. Wird es wohl in Zukunft möglich sein, die Dateien auch mit der 2.x Version von Cura zum Octoprint zu übertragen und zu drucken?
Weiß da jemand was?
Liebe Grüße
First layers okay, but a scratching nozzle off 5cm and more
in UltiMaker 3D printers
Posted
Good moring from Germany.
My prints with my UM2+ and Octoprint are good - but I have one mystery.
My first layers are beautiful. But after about 5cm the nozzle is scratching on the printed object. Like the z-direction ist not lowering the buildplate enough.
It's okay when I print an object, which has a good sticky stand on the plate. When not, the nozzle is kicking it away.
Of course I did a buildplate leveling - but the result is the same.
And it doesn't matter if I print left or right, front or back - always the same problem: Scratching nozzle on the object after some cm....
Has anybody an idea what I should do next - or did anybody had the same problem and has a solution for me?
Thanks, Holger