adz123

Hi Yellowshark, many thanks for your input- I will try your suggestions and feedback. I have attached another photo to help better describe the form of the model. You will notice that much of the model is suspended by support material due to a feature sticking out the side. (Not ideal) I have not used adhesive- I am pretty new to this and the printer was second hand without any sign of adhesive etc. Is it worth using adhesive as a matter of good practice? Many thanks again Adz

Hi guys, I have an original Ultimaker with a heated bed and single extruder. I am having an issue with warping (see attached photo) Current settings are: Cura Quality: Layer height: 0.1 shell thickness 0.8 Enable retraction [Y] Fill: Bottom/top thickness 0.6 Fill density 20 Speed/ Temp: Print speed 50 Print temp 220° (PLA) Bed temp 75° Support: support type Everywhere Platform adhesion type Brim Filament: Diameter 2.85 Flow 100% Machine: Nozzle size 0.4 Advanced settings Retraction: Speed 40mm/s Distance 4.5mm Quality: Initial layer thickness 0.3 Initial layer line width 100% cut off object 0 Dual extrusion n/a Speed Travel speed 150 mm/s Bottom layer speed 20 mm/s Infill speed 80 mm/s Top/bottom speed 15 mm/s Outer shell speed 30 mm/s Inner shell speed 60 mm/s Cool Minimal layer time 5 secs Enable cooling fan [y] I have tried running the PLA at 230° with the same issue Any help would be much appreciated :-) Many thanks Adz[/media][/media]