SWEYDA
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by SWEYDA
-
-
That looks like a model/slicing issue. Always look at your prints carefully in slice view before printing. Does it have weird issues in this area in slice view? For example maybe only printing every other layer?
Sliced view looked good, think the issue was bed adhesion. Appreciate the assistance.
-
What was it supposed to look like? But, it would seem from the outset that if you could not see it in Cura using solid or xray, something was not right with the model.
How was the model produced and did you convert it and if so, what software was used.
I've never seen anything like that, and I have messed up a ton of prints experimenting.
I think I figured it out! Bed adhesion! I have another print running now (60% speed) and dropped the bed temp to 50C (using PLA on glass)
I believe the tail end of the print moved causing the "hairs" (nozzle not aligned to the moved print)
Appreciate the help. I'm sure I will have more questions as I go... just got in to the printer 3 weeks ago!
-
Can only get half way through a print (21hr print) and this happens (see pic)
Ultimaker3 extended.
Materials: PLA
Sliced in Cura (though once I import the .obj file I can not see the model, only in Layer view)
Bed temp 50C to 55C
Extruder 210C
glue on the print bed
Room temp at 78F - 80F
Model situated at a 45degree angle (back left to front right) because I need a 1/1 scale so it's the only way I can get it.
Using Brim and supports (everywhere)
-
Load in what version of Cura? Could you share the model & Log files??
I loaded to Version 2.3.1 (Mac OSX operating system) Unfortunately I can not share the files due to a NDA (Non Disclosure). Is their any list of potential issues I could troubleshoot?
Thanks
-
Newbie so be gentle:)
Trying to import a model. I have both the .stl and .obj files! The .stl file loads but is not visible in any View Mode! The .obj file loads but is only visible in the "Layers" View Mode.
Once I attempt to re-size the model it disappears!
Print issues HELP!
in Improve your 3D prints
Posted
Nothing wrong (seemingly) in layer view. Realizing that this is a knowledge base / learning curve (my own) issue! Thanks for the help