[Grinding Noise during Travel on UM2+]

Thank you Torgeir I will keep your input in mind when I clean the pulleys. Listening in person and moving the print head by hand I am convinced both the X and Y axis need to be cleaned.
I will report back once I'm done...

[Grinding Noise during Travel on UM2+]

Hi LePaul no its not the filament. The sound is coming from the X and Y stepper motors or the pulleys. I'll try cleaning the belts and pulleys. I think I'm going to get a stethoscope to help isolate the noise if it keeps up.

 

I have two UM 2 Extended printers and they both get fed by the same version of Cura but only one has the problem.

 

Thanks for your reply!

[Grinding Noise during Travel on UM2+]

I also have an Ultimaker 2 Extended which has started making a horrible grinding noise in both the X and Y directions. I just replace the linear bearings in the head but that didnt fix it. I'm pretty sure nothing is rubbing. It sounds like its coming from both the X and Y stepper motors.

 

Here's a video of the sound. Does anyone have any ideas? 

 

https://www.dropbox.com/s/ugs2271ds1rji0u/20180306_103045.mp4?dl=0