birdy100
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by birdy100
-
-
Many thanks
that is really helpful thank you
-
Hi All
hoping somebody could please direct me to site to buy components for motherboard
I have sheared the 2 pins on the TEMP 1 socket so the thermistor won't seat and need to resolder
I think its called 2 pin header (molex?) but would like some comfirmation
Many Thanks
Simon
-
Hello good people on the Ultimaker forum!
my name is Simon and I am a tech, looking for any help or advice
on putting an Ultimaker 2 back together from its completely dissembled state
Please could anyone tell me the correct assembly order
for putting back the gantry: rods and belts and shutting them into the frame?
and any hints or tips on doing this would be great
Many thanks
Simon
Wiring order on UM2 Heated Bed
in UltiMaker 3D printers
Posted
Hi there
please could I get some advice?
I have reassembled my UM2 after a repair and have managed to put back most
connections so it turns on, using another UM2 (extended) as reference when rewiring
But 1 wiring difference between the printer models UM2 heated bed wires are blue and brown
UM2 Extended both wires are grey
does it matter which way round blue and brown wires go when connected to the green heated bed terminal ?
if so which colored wire goes next to the X step connector?
Many thanks in advance (really don't want to blow up motherboard)