[Wiring order on UM2 Heated Bed]

Hi there

please could I get some advice?

I have reassembled my UM2  after a repair and have managed to put back most

connections so it turns on,  using another UM2 (extended) as reference when rewiring

But 1 wiring difference between the printer models  UM2 heated bed wires are  blue and brown

                                                                                      UM2 Extended both wires are grey

does it matter which way round blue and brown wires go when connected to the green heated bed terminal ?

if so which colored wire goes next to the X step connector?

Many thanks in advance (really don't want to blow up motherboard)

[Where to buy parts for UM2 Board?]

Many thanks

that is really helpful thank you

[Where to buy parts for UM2 Board?]

Hi All

hoping somebody could please direct me to site to buy components for motherboard

I have sheared the 2 pins on the TEMP 1 socket so the thermistor won't seat and need to resolder

I think its called 2 pin header (molex?) but would like some comfirmation

Many Thanks

Simon

[Hi All advice with UM2 reassembly]

Hello good people on the Ultimaker forum!

my name is Simon and I am a tech, looking for any help or advice

on putting an Ultimaker 2 back together from its completely dissembled state

Please could anyone tell me the correct assembly order

for putting back the gantry: rods and belts and shutting them into the frame?

and any hints or tips on doing this would be great

Many thanks

Simon