[MAZ Cura Plugin 2.0 (for Cura 2.3.1)]

M117 BEGIN: ....

M117 END: ...

This is not included in the actual Gcode.

It is only a flag to protect Start / End Gcode internally in the plugin.

I originally used it as a comment.

In this version, cura ignored the last comment in Start Gcode, so I used M117 as a flag.

Increasing the input field to 32 is for inserting the layer parameters.

This does not support "one at a time" mode.

I will add it to the plugin description. Thank you

[MAZ Cura Plugin 2.0 (for Cura 2.3.1)]

http://cafe.naver.com/maz3dp/71

Download Source Code

0. Features

- Displays the current printing layer number on the LCD screen

- Partial 3D printing is possible by setting start and end layers

- Adjust the thickness of supporter

- Change the speed, temperature, etc. using 10 layer parameters.

- This does not support "one at a time" mode.

1. Copy this plugin to

c:\Program Files\Cura 2.3\plugins\PostProcessingPlugin\scripts\MAZCuraPlugin20.py

2. Modify Start/End Gcode :

Without this modification, the plugin will not work!!!

This will protect your Start/End Gcode.

- Add this to end line of Start Gcode

 

:M117 Printing...M117 BEGIN:MAZ-Cura-Plugin

 

- Add this to start line of End Gcode

 

M117 END:MAZ-Cura-PluginM104 S0 ....:

 

3. Modify Cura setting for input alphabet..

c:\Program Files\Cura 2.3\resources\qml\Settings\SettingTextField.qml

    about line 100...

before   

 

maximumLength: 10;validator: RegExpValidator { regExp: (definition.type == "int") ? /^-?[0-9]{0,10}/ : /^-?[0-9.,]{0,10}/ } 

 

after

 

maximumLength: 32;validator: RegExpValidator { regExp: (definition.type == "int") ? /^-?[0-9]{0,10}/ : /^[A-Z0-9.,\:]{0,32}/ }