cautio75
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by cautio75
-
-
My company just purchased a new Ultimaker 3 from amazon. We had our first print of 45 hours make it about 90% through the print. It got a heater error on the print head slot 1 ER15. I powered down the printer and started the same print over again and 5 hours into the print it failed again. Now it will not print with either “aa” print heads or the “bb” print head in slot 1. I was able to get the print to run on slot 2 for an hour or so now that print head seems to be clogged. I have also seen the error code ER12. Is there something wrong with the printer overall and should be returned? My company is looking for a turnkey type of printer. Is the Ultimaker considered a upper hobby grade printer? i checked the 10 pin connector on the print head to see if it was seated well and it was. i also cleaned both print head contacts with a cotton swab and alcohol. still getting ER15. i cant even load PLA in core 1. when it preheat the head it gives me the ER15 before the feeder even turns on.
THANKS chad
LINE NR 149501 PRINTER STOPED
in UltiMaker 3D printers
Posted
any idea what the problem is with this error? LINE NR 149501?
print stopped 2hrs into print.
thanks chad