Roffe
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Roffe
-
-
Hi,
Everything works fine with Cura 3.6.0. Now, I just installed Cura 4.4.0 as I was interested in the Profiles, first and foremost the Engineering profile.
I use Ultimaker filaments, black tough PLA and normal PVA, but it is not located at the back of my Ultimaker 3E, but in a Polybox. Unfortunately, Cura 4.4.0 says "profile not supported".
I suspect Cura require that the printer recognize the filament at its back.
What to do?
Profile not supported by Cura 4.4.0
in Improve your 3D prints
Posted · Edited by Roffe
Many thanks gr5.
Problem partly but not entirely solved, unfortunately.
I found that for some reason, Cura 4.4.0 had changed printhead 2 to AA 04 (PVA was selected). When I changed back to BB 04, I can see three profiles - Fine, Normal and Fast, regardless if I choose Tough PLA "generic" or "Ultimaker". When I try PLA for printhead 1, I can also see the "Extra fine" in addition to the others, "Fine, Normal and Fast". No other profiles can be seen.
During installation of 4.4.0, I chose to keep my profiles. If that is the problem - can I erase all old profiles in 4.4.0?
(In Preferences/Profiles I can see Extra Fine, Fine Normal, Fast under Global settings. Under Extruder 1 and Extruder 2, no profiles are found).