Soha
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Soha
-
-
-
Hey There
Two questions.
1.
I have been experimenting with the post processer in Cura 2.5 "Pause at height".
But it seems like I cant get the hang of it how it works....
I put in a height = 5.0 mm which equals 25 layers, since all layers are 0.2mm...
But doing so ain't stopping it in layer 25, but in 24, giving me a missing layer...
What height should I use?? How is this height measured?
2. When using the Cura function Pause at height to I want to change material.. I normally do that without the using the "change material" function. I simply just pull back my material and attach a new one (I changed the feeder to an iRoberti).
When resuming my print it doesn't extrude filament, even I did push that much through that the new color was extruded...
What should I do to fix that? The ultimaker doesn't "know" that I changed the filament..
Regards
-
Have you tried setting Fill Gaps Between Walls to "nowhere"?
Yes, it didn't help...
-
Hey Out There
I have discovered a funny thing. I made a 3D model with a wall thickness of 0.8mm.. When slicing Cura makes some sort of fill in the corners... Why..?
I use a 0.4 nozzle which should give me 2 perimeters...
I tried to reduce the wall thickness to 0.75mm with the same results...
After that I tried to make it solid, with 0% infill and no solid top... Still not getting the 2 perimeters I want...
Any suggestions.
Regards
Søren
Print area in CURA on UM2+
in UltiMaker Cura
Posted · Edited by Soha
Hi All
I do have a question, regarding my Ultimaker 2+ and Cura.
As shown in the picture, I have a region on the right I cant use.
How can I make that printing area accessible?
Regards