[Print area in CURA on UM2+]

Hi All

 

I do have a question, regarding my Ultimaker 2+ and Cura.

As shown in the picture, I have a region on the right I cant use.

 

How can I make that printing area accessible?

 

Regards

[Cura - Pause at Height and material change]

Are you sure the first layer isn't higher then the other layers?

Note that instead of the height, you can also enter the layer number.

I cant put in a layer number..? se picture..? All layer heights are 0.2mm

[Cura - Pause at Height and material change]

Hey There

Two questions.

1.

I have been experimenting with the post processer in Cura 2.5 "Pause at height".

But it seems like I cant get the hang of it how it works....

I put in a height = 5.0 mm which equals 25 layers, since all layers are 0.2mm...

But doing so ain't stopping it in layer 25, but in 24, giving me a missing layer...

What height should I use?? How is this height measured?

2. When using the Cura function Pause at height to I want to change material.. I normally do that without the using the "change material" function. I simply just pull back my material and attach a new one (I changed the feeder to an iRoberti).

When resuming my print it doesn't extrude filament, even I did push that much through that the new color was extruded...

What should I do to fix that? The ultimaker doesn't "know" that I changed the filament..

Regards

[Walls thicker then wanted]

Have you tried setting Fill Gaps Between Walls to "nowhere"?

Yes, it didn't help...

[Walls thicker then wanted]

Hey Out There

I have discovered a funny thing. I made a 3D model with a wall thickness of 0.8mm.. When slicing Cura makes some sort of fill in the corners... Why..?

I use a 0.4 nozzle which should give me 2 perimeters...

I tried to reduce the wall thickness to 0.75mm with the same results...

After that I tried to make it solid, with 0% infill and no solid top... Still not getting the 2 perimeters I want...

Any suggestions.

Regards

Søren