JHBP
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by JHBP
-
-
I have just tried the standard profiles "Normal" and "Fine" and they do not have the issue 😞 That means one of my custom settings is breaking it. I guess I can start over with "Fine" as a base, and change one thing at a time and see what breaks it?
-
Hi folks. I like the new version of Cura 4.4.0 🙂 But having trouble getting the internal geometry to work. The "Mesh Fix" options are turned off. Not sure what is going on? This is the model: https://www.thingiverse.com/thing:40605 (a beautiful chess set by PerryT).
-
Firstly: Thank you for making it free! I like the interface improvements. I only tried to use the previous version briefly, while trying to get my first 3D printer going (a rebranded Wanhou). I finally got it going with this beta! Minor issue on my laptop with the interface: the layer view box that opens in the bottom left was getting cut off at the bottom. Even hiding the taskbar was not making enough room. Would be great if I could move it somewhere it fits. The issue happens on a full HD screen, when you use the text zoom feature in Windows 10 e.g. 150% recommended zoom. I have that on all the time otherwise all text and the start menu is tiny. Also had some issue with importing profiles. I have 3 ini files with low, normal and high quality settings. Each time I imported a custom profile, it was the only one in the list. I was hoping to import all three, and then switch between them in the list of custom profiles. Not sure if this is normal to need to import each time I want to switch to a different one. I really appreciated the explanations on all the expert settings! It was great to look through and explore them all. However, some were still hard to understand. I know this is being VERY picky, but a little diagram would make the popup explanation even more awesome. You probably have those in your user manual, and I have not read that yet. And lastly, if you could add the Wanhou to your list of printers so it does not need to be added as a custom printer, that too would be awesome. The Wanhou was recently sold by the Aldi supermarket chain here in Australia, rebranded as Cocoon Create. There could be a lot of folks (like me) trying out Cura with these printers. Thanks again! : )
Internal Geometry Missing
in UltiMaker Cura
Posted
Yes... I was able to reproduce the problem! It is one of these settings. I don't really want to slice with one at a time 😞 Anyone know?
conical_overhang_angle = 45
conical_overhang_enabled = True
gradual_infill_steps = 4
material_flow = 107
material_print_temperature = 215
retract_at_layer_change = True
retraction_amount = 7
retraction_extrusion_window = 7
small_feature_max_length = 7
wall_line_count = 4
wall_overhang_angle = 45
wall_overhang_speed_factor = 50