[e3d Titan Extruder -> Firmware settings?]

Do you get this error randomly, or consistently?  At the start or well into the print?

It means there is a gcode that is at a value outside of the limits of the print area.  For example if your print bed is 200mm wide but there is a G0 X2000 (2 meters) then you get this error.

Many things can cause this error but if it is intermittent it means there is a problem reading the SD card where it's getting random bits flipped.  You will also notice the print head randomly moving to strange locations for no reason WAY outside your part and then continuing where it left off.

But if it's consistently at the start of print or during leveling or something then it's something else.

 

Unfortunately I get it consistently , and only with TinkerGnome in E3D Titan V6 kit

before getting the e3d one I was using the tinkergnome freely

But then I had to E3d marlin version

So if you have or you know someone who does have the e3d kit with the tinkergnome please link me as the marlin firmware is hard to deal with and hard to calibrate the printer with

[e3d Titan Extruder -> Firmware settings?]

Hey there

I know that this thread is old but I am having an issue with getting the e3d titan extruder kit to work with my UM2 Extended and TinkerGnome

If anyone of you has made a modified version of it please I would like to try it

Tried to compile TinkerGnome with my printer using arduino and given data in the e3d tutorial on what to change

But I got ERROR: Tried printing out of printing area

Please anyone who got this with his e3d and solved it show me how or send me his firmware update