[Printing Area with big nozzle offset.]

Hi guys, i make some pictures of my 3D printer :

First, with the bed at X=0 and Y=0

And at X=200 and Y = 200

So i've got all this space (in gray on the picture) to print :

But with cura settings, finally i've just this space :

Any advice ?

[Printing Area with big nozzle offset.]

Sorry, i dont have any photos with me but it's base on this printer :

With two extruders align on the Y axis.

So with the motor at the bottom, i need to have some space betwen the two extruders.

Better ?

[Printing Area with big nozzle offset.]

But thanks you, ahoeben, to trying help me !

[Printing Area with big nozzle offset.]

It's not my printhead that move but my bed.

And the 1st extruder can reach (0,0) to (200,200)

And the 2nd can reach (0,0) to (150,200)

So theoricaly i can print in area from (0,0) to (150,200) on my bed

But cura automaticaly cut the bed from both side when you enter the nozzle offset.

My point is: it's possible to cut just one side of the bed or adjuste the setting in cura ?

I can print with REPETIER but i don't have all the option given by CURA 2.7 and it's really furstating.

And no, i can't bring my extruders closer !

[Printing Area with big nozzle offset.]

No one know oO

[Printing Area with big nozzle offset.]

Hi guys,

I have a VK8400 and I recently add a second nozzle on it. I read this topic on how works the offset on cura : https://ultimaker.com/en/community/50628-cura-grayed-out-area-with-dual-extrusion.

My problem is that my offset is so big (-97 on Y) that my printing area is reduce to 6mm (Bed is 200x200mm).

It is possible to cancel this reduction of the printing area cause I can't print anything in this 6mm area?

Or it is possible to modify the way this reduction works?

In advance, thanks for your helps.