Madeucheamoi

Hi guys, i make some pictures of my 3D printer : First, with the bed at X=0 and Y=0 And at X=200 and Y = 200 So i've got all this space (in gray on the picture) to print : But with cura settings, finally i've just this space : Any advice ?

Sorry, i dont have any photos with me but it's base on this printer : With two extruders align on the Y axis. So with the motor at the bottom, i need to have some space betwen the two extruders. Better ?

But thanks you, ahoeben, to trying help me !

It's not my printhead that move but my bed. And the 1st extruder can reach (0,0) to (200,200) And the 2nd can reach (0,0) to (150,200) So theoricaly i can print in area from (0,0) to (150,200) on my bed But cura automaticaly cut the bed from both side when you enter the nozzle offset. My point is: it's possible to cut just one side of the bed or adjuste the setting in cura ? I can print with REPETIER but i don't have all the option given by CURA 2.7 and it's really furstating. And no, i can't bring my extruders closer !

No one know oO

Hi guys, I have a VK8400 and I recently add a second nozzle on it. I read this topic on how works the offset on cura : https://ultimaker.com/en/community/50628-cura-grayed-out-area-with-dual-extrusion. My problem is that my offset is so big (-97 on Y) that my printing area is reduce to 6mm (Bed is 200x200mm). It is possible to cancel this reduction of the printing area cause I can't print anything in this 6mm area? Or it is possible to modify the way this reduction works? In advance, thanks for your helps.