[Replacement of UMO+ Feeder]

i will make the aluminum holder too but i need to know what is the type of the alminuim ?and what are the circles diameters ?

[Replacement of UMO+ Feeder]

we are the first in Egypt to make ultimaker so it is very difficult because ultimaker is not familiar  here  , but it is already became our graduation project .so we have to do it anyway ..

i will look for the 3mm feeder .

[Replacement of UMO+ Feeder]

what about those? 

[Replacement of UMO+ Feeder]

teflon coupler ?

[Replacement of UMO+ Feeder]

clamp clip?

[Replacement of UMO+ Feeder]

quick fit coupling?

[Replacement of UMO+ Feeder]

 knurled wheel ?

[Replacement of UMO+ Feeder]

my problem with umo+ feeder that i can't find it's components here , if i can find some replacements for them i will use the umo+.

like the knurled wheel, quick fit coupling , clamp clip .AND FOR THE PRINT HEAD TOO I CAN'T FIND THE TEFLON COUPLER .so any suggestions ?

[Replacement of UMO+ Feeder]

do you have a design that i can print ?

[Replacement of UMO+ Feeder]

how? can't i use the mk8 directly ? what are the  modifications that i need?

[Replacement of UMO+ Feeder]

Can i replace the original UMO+ feeder design with the MK8 Feeder ?and how ?

[UMO+ PEEK Isolator]

what is peek isolator function in the UMO+ Extruder ? I can't find it.....so any suggestions for replacing it with something else in the same umo+ design

[UMO+ Extruder's Design advantages ?]

Hello, what are the UMO+ Extreuder's Design advantages that i Should mention in why i used it ?

[Extruders types and different versions]

Hello, i'm doing a report about different versions of extruders and their development .so any help ?

[upgrading UMO+single extruder to dual ?]

Hello Migo,

I'm not a expert but i work on a new design in Dual Extrution the Dual Balance system.

At the present time this system work well on a ultimaker 2 and there is some advantage:

1 No need to had other eletronics

2 No need to had other Power supply

3 using the same firmware of the ultimaker original Dual

4 The nozzle who is not active have a special Z level (-1.5mm) in order to protect the already printing things.

You can find some test here :

https://www.thingiverse.com/thing:2644923

Now i works to change the 12v fan with only 7 mm of thickness.

I don't know the ultimaker original but as mentioned neotko you need to change some things. May be you can find some examples to upgrade your ultimaker original in dual Extruder mode.

 

Thank you very much

[UMO+ syringe Extruder]

I don't recognize this specific design, but there are plenty out there that may also work for you;

https://www.youmagine.com/search/designs?utf8=%E2%9C%93&search=syringe

 

it is very useful

[upgrading UMO+single extruder to dual ?]

Thanks a lot

[UMO+ syringe Extruder]

Hello, I just saw this interesting design of adding Syringe extruder to UMO+ main extruder without changing the print head , but his owner didn't post additional information of it , so i'd like to know more about it and (CAD files , additional parts , printed parts ) which i we need here.

[upgrading UMO+single extruder to dual ?]

Hello, i'd like to upgrade this  t Umo+ single extruder to dual by adding parts , not changing the main extruder head itself .so any designs and information for this ?

[Ultimaker original + extruder presentation]

Hello , my graduation project is making an ultimaker original + 3d printer, and i wanna get a presentation and a report of the ultimaker original + extruder?