Jump to content

druckpunkt3d

Member
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Posts posted by druckpunkt3d

    No connection to my Ultimaker 3 ext

    in UltiMaker 3D printers

    Posted

    51 minutes ago, tinkergnome said:

     

    Sounds familiar...

    Is it connected via WIFI? And if...:

    WIFI connections on printers are usually very weak. Maybe one or more networks in the neighborhood are using the same channel from time to time and make it worse. If you can - try to configure a different channel on the WIFI router.

    ...or route a network cable and be happy for the rest of the printers lifetime 🙂

    It happens on both Wlan and Wired Network. I normally use no Wlan due to its weakness. I use wired network for all fix placed devices .

    No connection to my Ultimaker 3 ext

    in UltiMaker 3D printers

    Posted

    2 hours ago, Smithy said:

    And in a browser, when you enter the IP address of the printer, so you get a connection and the printer webpage?

     

    Yes I get a connection. After a few seconds the printer is shown as not available, than it comes back. This two state are changing again and again.

     

    2 hours ago, Smithy said:

    And if you can connect to the webpage, there is a event log link. Maybe you can see something helpful there after you send a job to the printer.

    The event log said "Print job cannot be sent. Sending the print job in several attemps faild due to unknown reasons. Check your Network-connection, purge this print job and send it again. After purging the Log everything starts from the beginning. I choose an object, put it in Cura. The printer is connected. I try to send it via Network. Cura says sending was successful. Than nothing more happens. The printer don't react and the "surveillance tab" of cura is empty. Only the printer is visible there. Now after 17 hours printing via USB (successfully), the Cura surveillance tab tells me that the print is now at 4% and ending tomorrow at 08:11.  

    No connection to my Ultimaker 3 ext

    in UltiMaker 3D printers

    Posted

    Quote

    So when you slice something and say print via network, Cura says ok sending to printer without any error but the printer does nothing right?

    Yes, so it works. I checked my Network but I can't see anything strange. No updates in the last weeks here. Same in Cura. I'd printed the last week without any issues and now nothing works.

    No connection to my Ultimaker 3 ext

    in UltiMaker 3D printers

    Posted

    Hi all,

     

    since today my UM3ext didn't work. Yesterday everything worked fine, no probs while printing. Today I want to start a print. Connection between UM3ext and my PC is online. Everything looks pretty good. But if I try to send a print job (doesn't matter which object, whic material or which profile) Cura (4.7.1, latest version for Win 64-bit) sends the print job (doesn't matter if sending via Cloud or network) on printer side nothing happens.  No message, nothing. The print job isn't visible in the Cura PC app or in the APP or Ipad (all Apps up-to-date). After a while the printjob appears with the following error message: "Print job cannot be sent. Sending the print job in several attemps faild due to unknown reasons. Check your Network-connection, purge this print job and send it again." I tried to reset cura connect - no success. I did a complete reset of printer, Cura,... - no succes. Now I don't know what to do next. Is here someone who can help me? (You can also answer in german ;-) )

     

    Regards, Sven

    Hello Folks!

    in Coffee corner

    Posted

    Hello!

    I would like to introduce myself a little bit.

    My name is Sven Bruns, 41yr old and I'm living with my family in the northwest of germany nearby Oldenburg. I've started my 3D printing experience 5 years ago with a little reprap to create some small test objects for the company I'd worked that time. The little reprap had to leave and the company decided to buy a leapfrog creatr, because they wanted me to print some larger objects. A few month ago I decided to (try to) earn a little money with my passion for rapid prototyping, so I founded a little one man company called "druckpunkt3d". (you will find my also on facebook, instagram ????) My first own printer was a Raise3d N2 Plus, but finally this was not the best decision... This printer drives me really crazy, approx 85% of all prints failed. Two times I send it back to renew a cuple of parts but this takes no effort. So I decided to say goodby to a very large print area and switched to an Ultimaker 3 Extended. It arrived yesterday I think this weekend I will do nothing else than print print print...

    • Like 1
×
×
  • Create New...