[How to get a smooth bezel print job?]

On 8/13/2019 at 4:08 AM, Ishy said:

You could try rotating it 90 degrees.The problem is that printers aren't simultaneous 3d so the Z will always be in small steps because they can't move all three axis at the same time. I work with cnc's and  printer is what we refer to at 21/2D.

This worked perfectly! A very smooth print job. Thank you for the brilliant suggestion 🙂

[How to get a smooth bezel print job?]

Quote

 

I will try to print it today rotated. Thanks for the suggestion!

[How to get a smooth bezel print job?]

I have drawn a simple model with a 2 inch bezel in both Sketchup and Blender.

Both models produce similar results after printing with Cura 4.2.1

The "steps" or "segments" of the bezel are very pronounced and I want them to be very smooth.

After trying this in 2 different modeling softwares I am thinking my answer is in Cura.

I print daily with the Ender 3 and have determined the printer itself is not the issue.

 

Attached is .STL from sketchup so you can see what I am printing. Also attached is an actual print job of the terrible results.

Is there some settings in Cura to help smooth this out?

Thanks

 

2 Inch SU.stl

[Hollow model not printing hollow]

Thank you very much for the fast responses. I am installing 3D Max now and start learning it. 

 

[Hollow model not printing hollow]

Hello everyone. I drew this model in Sketchup Make and exported it to Cura 3.20

It is a cookie cutter. Hollow.

No matter what I try it prints not hollow.

I am using Anet A8

Please see attached .stl file, picture and Cura config.ini

The picture is after 2% and making a second pass to fill in. 

Any help would be appreciated.

cutter 1.stl

Anet A8.curaprofile