[Bottom layer deformation when printing - Ultimaker 3]

I have always used Dimafix spray 

 

 

 

I am printing it again with a new plate to see if it makes a difference. I will let you know the results.

[Bottom layer deformation when printing - Ultimaker 3]

Hi Nicolinux,

 

I used the default print settings for PLA at 60 degrees for the bed temperature. I have bed leveling enabled and I did the manual and automatic before printing the parts.

 

One of the parts needs to be printed flat as it has a live hinge. I could try printing it upright and see what it happens.

 

I have a new glass plate I am going to try to switch it and see.

 

[Bottom layer deformation when printing - Ultimaker 3]

Hi all!

 

I can't seem to get my Ultimaker 3 to print everything perfectly. I am printing using PLA as my main material.

 

It seems that the layers closer to the bed are always deforming in the same spot. I am running the latest version of Cura and I did a full maintenance of the printer last week - images 1&2 are before the maintenance setup and 3-6 are after the setup, which we can see that the situation is better but not fixed.

 

I printed it with recommended settings and Fine (0.1mm) profile.

 

Any ideas to what could be the issue?

 

Thanks,

 

Victor