miniquandt
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by miniquandt
-
-
Just curious, what are your print settings. Do you use a Cura Standard or are you doing custom? (you don't have to type out all of your settings if your using custom)
I know that on a few of my prints if the part is very small it will trim off the small bits because it is too small to print. I don't think this is your issue because it will print fine one at a time.
Maybe you could try the print setting under [Special Modes] the "Print Sequence" switch it from "All at once" to "One at a Time". Maybe that would trick the slicer into printing the ribs.
-
I attempted different pause options (with a online g-code viewer). The only ones that didn't create a bunch of retractions issues are the "Pause at Height (BQ Printere)" and "Color Change". Should I use one of these instead of the "Pause at Height?
Please let me know if I am doing something wrong. I am loving useing Cura, but getting the pauseing to work properly has been frustrating.
-
This isn't my first time I had an issue with pause at height, but I don't know if this is an issue with Cura or Octopi.
For some reason when I try and print this file the first half prints fine, but when I get to the pause at height, all of a sudden it stops extruding when it resumes. Either has anyone else had this issue, or is there a way that I can view the gcode in anything other than Octopi?
Here is my current setup
Printer CR-10
Slicer: Cura
Plugin: Pause at Height
height: 4mm
Park Print Head X: 10mm
Y: 10mm
retraction: 25
Retraction speed: 25
extrude amount: 5
redo layers: 0
standby temp: 195
resume temp: 205
I need to get this printed by tuesday. I can print in one color (I have printed a few already) but I would like to get dual colors. I will try different settings to see if any of them work better.
Also I viewed the gcode in a online gcode viewer and got the same massive retraction issues.
cura 3.2.1 cant find retraction settings
in UltiMaker Cura
Posted
I have the CR-10, I use the RepRap as my Gcode Flavor. When I was setting it up someone said to use that so I picked it.