createthis
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by createthis
-
-
5 hours ago, ghostkeeper said:
Two workarounds, depending on how technical you are. Choose one:
- Download this file: https://raw.githubusercontent.com/Ultimaker/cura-binary-data/master/cura/resources/firmware/MarlinUltimaker2plus.hex And then upload it via Cura by going to the machine manager, click Upgrade Firmware then Upload Custom Firmware and select that hex file (also connect via USB first).
- Or go to the machine manager, click Machine Settings, and then paste the following text in the "end g-code" field:
I installed 3.3-beta last night and that seems to have resolved the problem.
-
I recently upgraded to the latest firmware on my UM2+ in order to gain the ability to print TPU for quadcopters. It prints great (love this!), but I immediately noticed a big blob on my prints. Switching back to PLA, there's that blob again. Is there a workaround short of waiting for Cura 3.3?
UM2 Print quality issues with ABS
in UltiMaker 3D printers
Posted
Necro posting on this because I was searching for something and stumbled on this thread and I didn't see an answer.
The horizontal lines appear to be z-bearing binding. This is a common problem on the UM2. The solution is annoying. You need to buy higher quality z bearings, tear the machine down, and rebuild it.
I had the same problem with my UM2. It's solved now, but it was a pain to solve. I don't know how Ultimaker let crappy z bearings like this out the door. It's a manufacturing defect.