[Auto Bed Levelling Issue/Bed Damage]

Hello @SandervG,

I've readjusted the back screw so that the glass is at 2cm and that seems to have solved the problem.

Thanks for your help!

[Auto Bed Levelling Issue/Bed Damage]

Apologies for the poor quality image. I hope the below is suitable.

 

Many Thanks, James 

[Auto Bed Levelling Issue/Bed Damage]

I wanted to see if doing a manual level would solve the issue, but to no avail. After that and another active level i made no more calibrations.

 

I've measure the gap again, please see the attached image. Appears to still be a 14mm gap. Any other thoughts?

[Auto Bed Levelling Issue/Bed Damage]

Hello @SandervG
Thanks for getting back to me quickly. The nozzle and bed look clean/ no obvious obstructions, and I have moved the screws on the base plate so there is only a 14mm gap. 

I then tried to do a manual leveling, no issues found. I then tried running active leveling and the nozzle again is impacting the print bed. I can't think what is causing this?

[Auto Bed Levelling Issue/Bed Damage]

I appear to be having an issue(s) with my Ultimaker 3. The first problem that occurred was when trying to do a print the message 'Difference between detected height of both PrintCores exceeds realistic values'. I tried to solve this by switching the machine on and off again then printing again, watching more closely I saw that when undergoing auto-levelling the print core nozzle was impacting the glass bed, causing an indent in the bed. Does anyone have any idea how to resolve this issue.?    

 

Many Thanks,
James