sweetclarakim
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by sweetclarakim
-
-
I solved this issue with the newest version CURA 4.3.0
-
Cura 전문가 여러분,
1.6mm 두께의 오프셋 모델을 만들었습니다.
이것을 CURA 3.4.1로 슬라이스하면 두면에 2 개의 작은 구멍이 있습니다.
이미 모델링을 확인했지만 오류가 없습니다.
CURA 설정을 변경해야한다고 생각합니다.
조언 좀 해줄 래?
진정으로,
클라라
-
I have learned that only a few settings in CURA.
With these, it seems to be not enough to apply what I want to print well.
Step by step, I am applying to my CURA the information which I have been learning from YOUTUBE, but it is so confusing.
I am using 0.4 nozzle and usually, I print very thin and details like the pictures what I uploaded.
Could you guys check my setting, please?
If I have to change something, what do I have to do?
Thank you in advance!
Best regards,
Clara
-
Thank you so much for your great advice!
Now I am studying CURA profile setting.
It is really helpful to study 3D printer.
I will buy 0.2 nozzle right now
-
I am using a special 3d printer which is made in my country.
My nozzle is 0.4mm and I would like to print very very thin and detail.
Now I am using CURA 3.3.1 and I would like to know that the exact profile for Cura profile setting for layer 0.05mm, nozzle 0.4mm.
Thank you and have a fun day with your 3D printer.
Best regard
Clara Kim
Y axis stepping out after upgrading CURA 4.3
in Improve your 3D prints
Posted · Edited by sweetclarakim
I upgraded from CURA 3.4.1 to CURA 4.3.
In the left picture which is my first printing with CURA 4.3, Y axis stepping out had been occurred.
And the next picture, as you see, left one was printed by CURA 3.4.1 and the other is CURA 4.3.
Both are in the same settings.
If you have experiences like me, please give me an advice.
Thank you in advance!
Regards,
Clara
CFFFP_Hareubang_20191024_CURA_4_3.gcode UMS5_Hareubang_20191024_CURA_r_4_3.gcode CFDMP_Hareubang_20191024_3_4_1.gcode