[Multiple error codes]

Now that I got the pile of parts completed, I upgraded the firmware on my machine as well.  Hopefully that will let me go back to the newest version of Cura.

[Multiple error codes]

3 hours ago, gr5 said:

I still think the file was either severely corrupted or it wasn't a gcode file at all.  Did you look at the gcode file yet?  I mean with a text editor.  It's a human readable text file.

It's been too long for me to remember what the file should look like.  Since I couldn't tell the difference, I moved on.  I blew out all the old files that could have been bad anyway.  Since a Cura version change definitely corrected my problem and I had to get the project back in motion (this is just one of many things on my plate at the moment) I didn't spend any time on it.  When I explain my findings with a coworker, it seemed similar to his issues.  I suppose we need to look into a firmware update.

[Multiple error codes]

10 hours ago, fbrc8-erin said:

Line NR errors (Line Not Read) is most often the result of a corrupted file on a USB stick due to unsafe removal from the computer. Reformatting the USB stick usually does the trick in that case.

Were all of these error message on 1 file, or multiple files?

One printing method? Or multiple printing methods? (i.e. did you try USB, and then try LAN/wifi when USB didn't work?)

I got so excited, thinking you hit the nail on the head!  Alas, I'm still sorting it out, but I've at least narrowed it to Cura.  I successfully started a print of an older model, previously printed, and that worked fine, which rules out the printer and the USB stick being bad, although I did reformat the USB stick.  I tried processing the same original stl file with Cura, and it didn't work.

LAN and wifi aren't an option for me, unfortunately.

I noticed that the .gz extension was new, so on a whim I uninstalled Cura and installed an older version.  It appears I'm back up and running.  Not sure why, but now I have to get caught back up!

 

Thanks a bunch for your help!

 

 

[Multiple error codes]

Hi, I'm new Things have been going swimmingly with our new 3E up until today.  A coworker pointed out he got an error message the other day about build volume (he wasn't real clear) and I didn't think much of it. He said he drove on with the ignore option.

I got a new computer and had to reload Cura, which may be a part of my particular problem, but I'm willing to entertain any thoughts.  Completed the model in Cura and tried to load it into the machine.  All sorts of errors:  Build volume.  Error with the last words of "Line nr = 18." Print job is not suitable...ER26.  Forgot the rest.  I'm stumped.  Tried several things my ignorant mind let me, but no improvement.

 

Thoughts?