Siggi
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Siggi
-
-
Hi berndjm,
sorry, i don't want to try this a third time, because it diggs very hardly, and the forces are high (dont want to destroy my nozzle)
When i analyse the code i can see following:in lines above it is at position Z3.3
then the pause script starts and moves the head down to 1mm ---->>> G1 F300 Z1
then the scriptz elevates it to 15mm --->>> G1 F300 Z15
thereafter back to 3,5 G0 X144.47 Y126.99 Z3.5 (what would be alright.
The code to move the head down to position 1mm is definitely wrong --- buggy script
-
I insert a pause at height 17 (want the printer to make a break for a moment at this layer)
reaching this layer the printhead hardly hits in the object and then pauses. It destroys the print by hitting it. i have to reset the printer. what am i doing wrong?
see attached screenshot the cura settings for pause.
-
Cura 3.3.1 insert pause at height hitts the object
in UltiMaker Cura
Posted
I think there is just left a G91 in the code to set relative positioning