Brion

Hello tinkergnome, The result is the same if I shorten the name. Thank you

Hello, I attached the G-code. The file named "DDG_plug2_top-only.gcode" is the file that works on my printer. I created the model but to get it to print my friend had to create the g-code on his computer and save it to my sd card. The file with the name "DDG_plug2_top_only04Setp18.gcode" is the code I generated using my computer. I get the slicer warning with this code. This morning I did an experiment by taking the file that will print and copying it and changing the name. I get the slicer warning with this file too. This file is named "G_code_that _will_not_work.gcode". I created this file by copying the "DDG_plug2_top_only.gcode" and saving it with the new name. I did this all in the Unencrypted folder. With my latest experiment it seems the issue may be from my computer. Hopefully someone has experienced this issue before and has a solution. I configured two machines. I made one reprap and one Ultigcode. I have deleted both machines and created a new one that is Ultigcode. Thank you for your help. DDG_plug2_top_only.gcode G_code_that_will_not_work.gcode DDG_plug2_top_only_04Sept18.gcode

Hello, the firmware version si 15.05.5ex. I added an screenshot of the machine settings. Thank you for any help.

gr5 Thank you for the response. I have it set to Ulticode and I get the same warning. I also created a machine with reprap style and it creates the same warming (as expected). Is there anything else I can look at? Thank you.

Hello. I recently started receiving the message "this file will override machine settings with settings from the slicer". I have an Ultimaker Extended 2+. I have scoured the internet and this community for a solution. I have tried every suggestion I could find and I still get the same message. My friend has the exact same printer. We compared settings and they are exactly the same. I created a model and converted it to .STL. I used Cura 15.04.5 and 15.04.6 to set up the print job. I save it to the SD and insert it in the machine. I select print and get the error. My friend who has the exact same machine and we have identical settings can take the same model I created and set it up in Cura on his computer (same version) and save it to the same SD card I was using and I can print without any problems on my Ultimaker. I have tried multiple SD cards. Does anyone have any suggestions what I may be missing. Any help is greatly appreciated.