[Firmware 5.8.1 for S-line printers is now available]

Hello SandervG,

 

Thanks.

I'll upload now these files  in my ticket and will submit it.

 

Best regards,

 

Nasko

 

[Firmware 5.8.1 for S-line printers is now available]

Hello SandervG,

 

Thank you for your fast reaction.

 

Because, on the USB Flash there are many files - which one  you  need. I exported LOG from the printer to the flash memory.  Are these OK? Only with curren date - from today?

 

 

Regards.

[Firmware 5.8.1 for S-line printers is now available]

Hello all,

 

Yesterday we update our UM  S5 with latest Firmware 5.8.1.

After that we observed the following problems:

 

 

1. There is not connection between the the printer and  Cura. We checked with our IT colleagues - there is connection between the printer and the PC (ping). When we try to refresh the printer in Cura  - this screen appears for about 5 seconds and   disappear.

S5 cannot print from PC (Cura 4.7.1)

S5 can work (print) with USB.

The camera is not working.

 

 

S5 can work (print) with USB. The Camera is not working.

 

2. After firmware update , appear ER 67 . We never experienced this issue before. The material station is less one year old. We follow the instructions regarding the ER 67 from the UM site - no result. The error appears again. 

 

 

Please, help me to solve this problem.

I red that the firmware 5.8.0 has problems and wait for the release new firmware with fixes problems. It seems there are still any. 

[S5 Material Station Softwareproblem]

Yes , the reseller  inform me,  but AFTER I ordered and got the upgrades and when I asked him, whether I must update my firmware. 

[S5 Material Station Softwareproblem]

Hello everybody,

 

I ordered and got both - the material station and air manager.

Unfortunately the reseller   warns me , that there is problem with the firmware and will be not possible to use these new elements. According the reseller,  the new update  maybe will appear after 10th of November.  Now I must wait more than 3 weeks ... if the date is kept.

I think, that Ultimaker must warn his customers for this problem. On the site there is no single word for that!

This is not correct.

[Cura 4 forgets networked printer + cloud connect features dont work]

After I installed the new version of Cura - 4.1 my printer is again visible. Thanks ! 🙂

[Cura 4 forgets networked printer + cloud connect features dont work]

On 4/6/2019 at 6:24 PM, Rainbowdashboard said:

if its manual, you set a specific IP in the settings of Cura. It means it should be more reliable to pick it up. I have mine added both ways, manually and automatic. neither pick up the printer. its the only one in my house, whats not working?

But by previous versions of Cura and firmware I have not experienced such a problems.

[Cura 4 forgets networked printer + cloud connect features dont work]

Same problem. Every time after I get out of Cura and after that enter in Cura I must refresh! My printer is designated in the list of printers as Ultimaker(manual). What that means?