pman
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by pman
-
-
hi! this has been answered before but i cannot seem to find where the input area is for MACOSX. If i enter the code into Machine settings area "start g-code" the machine STILL overrides and start heating the extruder. I dont want it to heat the extruder first, but rather start the AUTO LEVEL BED and then heat up extruder afterward. Could someone please shed some light on this?
thank you!
-
so it was the LIFT HEAD in cooling section. i have unchecked it.
-
i think it may be the LIFT HEAD in cooling section. im trying it out now.
-
could someone help me out with cura, its a little bug or something that i cannot put my finger on it.
everytime or most times when a build is at the end of printing, coming to a point, the head decides to move away, stop and then come back to comtinue the point and it will do this a couple of times and totally mess up the top point of the print, and then it finishes.
thanks.
-
thank you, that helped. i just didnt hit PREPARE.
-
CURA auto bed level BEFORE heating extruder MACosx
in UltiMaker Cura
Posted
thanks guys,
i got it working with this and seems to be working as i need it to.
code taken from all over
G28 ; home all axes
G29 ; Auto Bed Level
G28 ; home all axes
M104 S{material_print_temperature} ;Start heating extruder
M140 S{material_bed_temp_wait} ;Start heating bed
M109 S{material_print_temperature} ;Wait for extruder to reach temp before proceeding
M190 S{material_bed_temp_wait} ;Wait for bed to reach temp before proceeding
M117 Purge Extruder ; Shows "Purge Extruder" on the screen
G92 E0 ; reset extruder
G1 Z1.0 F3000 ; move z up to prevent scratching of surface
G1 X0.1 Y20 Z0.3 F5000.0 ; move to start-line position
G1 X0.1 Y180.0 Z0.3 F1500.0 E15 ; draw 1st line
G1 X0.4 Y180.0 Z0.3 F5000.0 ; move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; draw 2nd line
G1 E27 F5000 ; retract filament 5mm
G92 E0 ; reset extruder
M117 Done Purging Extruder ; Shows "Done Purging Extruder" on the screen
G1 Z1.0 F3000 ; move z up little to prevent scratching of surface
M117 Now Printing... ; Shows "Now Printing" on the screen