DHQidiTech1
-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by DHQidiTech1
-
-
Awesome! Thanks for the help. Works as expected now.
-
Can someone explain why I am getting an extra retraction command right before my skirt starts? When I print, the filament doesn't print for sometime because of the extra retraction. I have tried it in both 3.4.1 and 3.5. Maybe I have a setting that is checked or set wrong. Below is my gcode from 3.5.0
;FLAVOR:RepRap
;TIME:966
;Filament used: 0m, 0.239212m
;Layer height: 0.1
;Generated with Cura_SteamEngine 3.5.0
T1
M190 S60
M104 T1 S200
M109 T1 S200
M82 ;absolute extrusion mode
;Start G-code ----------------------------------------------
G28 ;Home;Prime the extruder
G92 E0
G1 E3 F200
G92 E0
;Start G-code ----------------------------------------------
M83 ;relative extrusion mode
G1 F1500 E-6.5
;LAYER_COUNT:18
;LAYER:0
G1 F1200 E-9.5 <<<<<<<<<<<<<<<<<<<------------------- Here is the extra retraction ------------------------------
T1
M107
G0 F3600 X96.903 Y65.048 Z0.3
;TYPE:SKIRTI have also attached the project file.
-
If you want to set the extruder temperature in your Start G-code, you need to define it as {material_print_temperature, <extruder#>}. So, to set the print temperature for extuder #1 the code would be:
M104 S{material_print_temperature, 0} T0 ;Set extruder 1 to print temperature
M109 S{material_print_temperature, 0} T0 ;Stabilize extruder 1 print temperature
For extruder #2:
M104 S{material_print_temperature, 1} T1 ;Set extruder 2 to print temperature
M109 S{material_print_temperature, 1} T1 ;Stabilize extruder 2 print temperature
-
I just installed your latest build and it is working great. I was able to open both an IAM (assembly file) and an IPT (part file). Thank you for working so hard on fixing this plugin.
-
I am still getting the same error as before. Cura is telling me that it cannot open files of that type. I am trying to open an Autodesk Inventor ipt file from Inventor 2016. I tried your v4 and v5 package. Is there something specific I should check for. Maybe I am doing something wrong.
-
I was able to install the plugin, but when I tried to open an Inventor part I got an error that said "Cannot open files of the type ... ipt." I am trying to open in Cura 3.5. Your previous plugin worked great in 3.4.
-
I don't know if it was okay before. I wasn't trying to print anything until I got the correct temp in the gcode. Now I need to figure out why my printer is not printing the complete first layer. Using different slicers doesn't generate the same problem. I need to first determine if there is a problem created when I convert the gcode to X3G or if it is the gcode the is the problem. I am not really sure where to start yet. I need to do some research.
-
I was able to get the correct temperature pulled into my gcode using {material_print_temperature, <extruder number>} (thank you, ahoeben). The problem I am having at the moment is that the filament isn't coming out of the nozzle for the first several passes on the first layer. I am not sure where that issue is even addressed yet.
-
I am experiencing the issue in 3.5. When I try to define my print temperature in my start gcode, it always sets to 210C for both extruders. The code I am using for my extruder temperature setting is:
M104 S{material_print_temperature} T0
M104 S{material_print_temperature} T1
Here is the resulting gcode:
M104 S210 T0
M104 S210 T1
I have set (using the GUI) extruder 1 to 235C and extruder 2 to 200C. Am I using the correct variable, {material_print_temperature}, in my startup code?
- 1
Cura 3.5 GCode always works at 210º nozzle.
in UltiMaker Cura
Posted
I already started a new thread and the problem was solved. Is there a way I can delete my last post in this thread?