[Outer Before Inner Walls - gaps at the beginning wall]

1 hour ago, smartavionics said:

Hello @jiberan, the problem is that it is doing a relatively long travel move without retraction immediately before the outer wall is started. There are two settings in the travel category that can help you here. You can either enable Retract Before Outer Wall or you can set Max Comb Distance With No Retract to a value such as 10 which will make all combed travel moves longer than 10mm use retraction. Hope this helps.

 

 

 

Combing mode have no effect. Combing mode: Off - the exactly same like before.

 

Combing mode: Not in Skin + Retract Before Outer Wall - (on pictures down) gaps at the beginning little shorter, but still missing material at the beginning outer wall. I think in this case not help this setting, but only the shortest travel distance.

 

 

2CFFFP_valec 50.3mf

[Outer Before Inner Walls - gaps at the beginning wall]

I have problem, when I use Outer Before Inner Walls, then I get gaps at the beginning of every outer wall. Rest is ok. When I print inner wall first, then is no problem, but for the exact size I need outer wall first. Look like lack of material after retraction and traveling on beginning outer wall.

I tried Z Seam Alignment: Random, but it just spread gaps randomly around.

Complete setting in attachment

CFFFP_valec 50.3mf