UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
With the "expert" level activated in the Print Setup of Cura, expand the Material section and at the bottom should be "Nozzle Switch Retract Distance/Speed". You'll need to set the retraction distance for the switch nozzle function specifically and then select "Extruder 2" at the top and add those settings again to set it for both materials. It may be something else, but it sounds like that could be it if you're seeing it work for one and not the other. Good luck! -Brian
Dual Extrusion - nozzle switch retraction problem
in Improve your 3D prints
Posted
With the "expert" level activated in the Print Setup of Cura, expand the Material section and at the bottom should be "Nozzle Switch Retract Distance/Speed". You'll need to set the retraction distance for the switch nozzle function specifically and then select "Extruder 2" at the top and add those settings again to set it for both materials. It may be something else, but it sounds like that could be it if you're seeing it work for one and not the other. Good luck! -Brian