Rifraf66
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Rifraf66
-
-
Hi GR5
Yes your right - i looked and it showed the support as you said. But i do agree - best put some supports in cad - especially for those canitlever bits where there is nothing underneath. I should have added something thin in CAD that i could easily remove after it's printed.
My CAD skills are poor as i normally have a cad guy at work to drawing work for me. I am using a 30 day trial version of ACAD that i am playing around with at home. Took me about 10 hours to do that candle thing - thats how poor my cad skills are.
Many thanks again - am learning slowly.
-
HI Guys
Thanks for your input. It does indeed appear to be the support material - because when i break it into 2 pieces - the actual candelstick i modelled is inside - but i cannot remove all the support material that has been fused onto it.
When i remove the create support prior to slicing - it prints out fine.
Jeez - i tried it 4 times before i saw your comment and unticked the "support" box on Cura.
GR5- netfabb sounds like a great resource to have access to - many thanks for the link.
Thank again.
-
Messed up Print - Looks fine on Cura 3.6.0 - But print ISNT
in Improve your 3D prints
Posted
see attached photo of final candlestick thing