[UM3E - Splitted screen]

Hello guys,

it has been a while since this is happening to my UM3E display screen. This is not a big problem, my printer still working well, but this is such annoying.

I don't have any idea why this is happening, my firmware is up to date (5.2.11.20190503). Anybody have already been through this?  

[Resuming a failed print on UM3]

3 hours ago, peggyb said:

the easiest way to deal with this is to print the missing part by detecting where it failed, then sink the model in Cura beneath the bed and glue the parts together.

Even if you could manage it to resume the print, it will be a visible seam, which also happens if you pause and resume a print.

 

 

Thank you @peggyb for your attention, I used to do this in the past when printing with Fortus400. After reading some topics I've discovered how to turn off the auto leveling. But the print head is still hitting the piece, for some reason, the height that I've chosen to cut in the Gcode is wrong, for now, I don't have much time to run some tests but I'll give a try another day.  

[Resuming a failed print on UM3]

Hello Tac,

I'm having the same problem, have you discovered any way to solve that? 
I can't find a way to disable the initial calibration too