dminsb
-
Posts
9 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by dminsb
-
-
The problem was occurred again during the Printhaed coming to home (origin) when the normal printing ended.
And the problem has occurring always since that. (Printhead to home, Material Change, etc...)
So, I did factory reset. But that problem was occurred during the starting setup too.
(Today, It was ended up the starting setup in one way or another.)
I attached the VIDEO file that filmed the problem.
What can I do to resolve this issue?
Should I replace the Limit Switch?
(My UM3's warranty is remained about a month, I bought it Apr,2018)
-
15 hours ago, CapableQuad said:
Yes, I don't have any issues as long as I dont use the maintenance option to do head cleaning. I guess we should report it as a firmware or hardware issue if it is prevalent for others?
I think so too, The limit switch in my UM3 has no problem mechanically.
So, I wish this issue should be resolved by software or firmware update.
-
2 hours ago, CapableQuad said:
I had this happen to me yesterday, it has never happened before. I was performing the maintenance procedure for cleaning the print head. I normally do this manually without using the menu system. For some reason I used the maintenance menu to clean the head yesterday, this is the first time I have used this feature since I have owned my UM3. I have done hot and cold pulls manually in the past many times in the past though. At the start of the procedure when the print returned to the home position the problem occurred. I thought it may have been an aberration caused by some dirt or other issue so I tried again using the menu system. The same problem occurred. I therefore performed the hot and cold pulls without using the maintenance menu.
Strange thing is that the printer performed normally after this during normal printing operations.
Lesson learned for me - don't use the maintenance system for print head maintenance.
My guess is that the home position for the automatic procedure is not correct or the range is too specific.
Anyone else had this problem (excepting the responses above).
Yes, I quite agree with your opinion.
It doesn't happened any more at normal printing.
And I changed the X,Y offset 0 to +4.0 to prevent this problem.
Remained issue is, I can't use the material change menu because scared that there is possibility the issue occurs again..
So I should change the material manually..
-
Hello,
Since yesterday, I've hearing a sound like Long Beep Sound of PC from 2nd feeder during retraction, not motor sound.
Is there any action I can resolve it?
-
Thank you for the reply! :)
Ok I'll try the way you provide me when I return my office.
-
Unexpectedly today, While I changed the material,
My Ultimaker3 show me the error massage "ER17 - The X or Y axis is stuch or the limit switch is broken", at the same time with the Head trying to move more back & left
(with a sound 'ddadadadadadadadadaa~~~~~~!@!@!@'),
Although it has already arrived at home position.
(troubleshooting : ER17)
https://ultimaker.com/en/resources/23151-the-x-or-y-axis-is-stuck-or-the-limit-switch-is-broken
But the limit switch has working while "System > Maintenance > Print Head > Home.
So, I think the switch is not broken physically. it works...
So why?
Is there anyone has the problem same with my case?
How did you solve that issue??
-
Unexpectedly today, While I changed the material,
My Ultimaker3 show me the error massage "ER17 - The X or Y axis is stuch or the limit switch is broken", at the same time with the Head trying to move more back & left
(with a sound 'ddadadadadadadadadaa~~~~~~!@!@!@'),
Although it has already arrived at home position.
(troubleshooting : ER17)
https://ultimaker.com/en/resources/23151-the-x-or-y-axis-is-stuck-or-the-limit-switch-is-broken
But the limit switch has working while "System > Maintenance > Print Head > Home.
So, I think the switch is not broken physically. it works...
So why?
Is there anyone has the problem same with my case?
How did you solve that issue??
LIMIT SWITCH HASN'T PROBLEM BUT ER17...WHY?
in Improve your 3D prints
Posted
Hi ewrykmy,
I tried bend the metal plate on the limit switch, but the problem has still been occurring.