cagriahiskali
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by cagriahiskali
-
-
After 3 months sleeples nights finally I solved the problem. Just watch the video ;))
-
Hi Guys,
Finally I fixed the problem. Here is why its happening..
- 1
-
-
I have the same layer skips in Cura4.. Slic3r does not make this skips..
Cura 4.0 Stringing and Print Blobs, Retraction doesn't seem to be helping
in UltiMaker Cura
Posted
Do not bother with acc and jerk settings.
Set Print temp 185-190ºC for PLA
Print speed may be 40-60
Retract speed 1,4m and 15mm/s
Important: make sure your extruder max speed is set above retraction speed. Most printers are limited to 5mm/s. Set it above 25mm/s from the machine ram settings..