[Cura 4.2.0 Slicing Issue]

@burtoogle You are a star, I changed my max z speed to 10 from 5 and it works a treat. Many thanks for the help.

[Cura 4.2.0 Slicing Issue]

I cannot find anywhere to change the max z speed that sorts this issue.

[Cura 4.2.0 Slicing Issue]

Unable to slice

 

Unable to slice with the current settings. The following settings

have errors:

[Cura 4.2.0 Slicing Issue]

Mine also complains about Z Hop Speed even if I disable Z Hop. I have tried every spped for Z Hop from 0 to 100 and none work.

 

I have spent approx 4 hours tweaking every setting in Support Section and none work even slightly only turning off support works but I like many others need to use supports sometimes.

[Cura 4.2.0 Slicing Issue]

Hi All,

 

I have just upgraded my cura to 4.2.0 and have come across a strange issue.

 

If I turn on supports I get an error message box as shown in the attached picture, but if I turn supports off there is no error and it slices perfectly.

 

Any ideas ?