Serg2019
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Serg2019
-
-
Hi! I'm new in Cura. I'm trying to make "roof" layers over low density infill structures printing as bridges. It seems, it only works for Bridge Skin Support Threshold=100%. Any lesser values cause ordinary skin printing behaviour of the layers (flow, speed etc). How to achieve that bridge-mode printing depending on the given threshold of the underlaying infill density?
'Roof' skin in bridge mode. How to?
in UltiMaker Cura
Posted
In that example I used zero infill, but I've experimented with different density values - got the same result.
100% threshold in not ok as well because it causes another issue... hmmm... For that particuar cube, if I use 3 bottom skin layers then set bridging support threshold = 100% it happens that first 2 layers appear normal but the 3d one becomes bridge-styled. It seems like Cura detects that the 1st layer is like 100% solid but the 2d one is not. So, it draws 3d layer as a bridge over that.
I'm not sure if I described that issue correctly. There are too many things at this point look odd for me. For instance, when I change the threshold from 99% to 100%, Cura switches cube walls' speed aswell. I don't know, whether all these issues are bugs or I do not understand Cura's principles right so I do everything odd.