[cura4.3.0 not spiralizing outer contour]

so i just installed cura 4.3.0 with all of the standard settings for the cr-10 and when i enable spiralized outer contour i still get a z seam and not a continous z movement

here is some g code it made

G92 E0
G92 E0
;LAYER_COUNT:762
;LAYER:0
M107
G0 F6000 X88.337 Y88.412 Z0.2
;TYPE:SKIRT
G1 F1200 X88.582 Y88.168 E0.0115
G1 X89.389 Y87.39 E0.04878
G1 X89.533 Y87.254 E0.05537
G1 X91.96 Y84.997 E0.1656
G1 X92.094 Y84.875 E0.17163
G1 X92.453 Y84.552 E0.18769
G1 X92.707 Y84.33 E0.19891
G1 X93.575 Y83.596 E0.23672
G1 X93.734 Y83.464 E0.2436
G1 X96.353 Y81.332 E0.35592
G1 X96.481 Y81.229 E0.36138
G1 X96.88 Y80.914 E0.37829
G1 X97.154 Y80.705 E0.38975
G1 X98.053 Y80.04 E0.42694
G1 X98.219 Y79.92 E0.43376
G1 X100.925 Y77.995 E0.54421
G1 X101.087 Y77.881 E0.5508
G1 X101.477 Y77.614 E0.56652