[Looking for help with CuraEngine Slicing]

I can provide the .stl for this file if that'll help too, but

here is the -v output from CuraEngine during the slicing process:

Cura_SteamEngine version master
Copyright (C) 2019 Ultimaker

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
[WARNING] Unrecognized data type in JSON setting machine_disallowed_areas
[WARNING] Unrecognized data type in JSON setting nozzle_disallowed_areas
[WARNING] Unrecognized data type in JSON setting machine_head_with_fans_polygon
[WARNING] JSON setting gantry_height has no default_value!
[WARNING] Unrecognized data type in JSON setting machine_head_with_fans_polygon
loading 'Flattened_Lapras.stl' took 0.001 seconds
Loaded from disk in 0.006s
[WARNING]  -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s mesh_position_y="0" -s center_object="false" -s small_feature_speed_factor_0="50" -s small_feature_speed_factor="50" -s small_feature_max_length="0" -s wipe_hop_speed="10" -s wipe_hop_amount="1" -s wipe_hop_enable="true" -s wipe_pause="0" -s wipe_retraction_retract_speed="3" -s wipe_retraction_amount="1" -s max_extrusion_before_wipe="10" -s clean_between_layers="false" -s wipe_retraction_extra_prime_amount="0" -s bridge_skin_density_3="80" -s bridge_skin_material_flow_3="110" -s bridge_skin_speed_3="15" -s bridge_fan_speed_2="0" -s bridge_skin_density_2="75" -s bridge_skin_speed_2="25" -s bridge_enable_more_layers="true" -s bridge_skin_density="100" -s bridge_wall_material_flow="50" -s bridge_sparse_infill_max_density="0" -s bridge_skin_support_threshold="50" -s wall_overhang_angle="90" -s adaptive_layer_height_variation_step="0.01" -s adaptive_layer_height_enabled="false" -s wireframe_nozzle_clearance="1" -s wireframe_roof_outer_delay="0.2" -s wireframe_roof_fall_down="2" -s wireframe_straight_before_down="20" -s wireframe_strategy="compensate" -s wireframe_drag_along="0.6" -s wireframe_fall_down="0.5" -s wireframe_top_jump="0.6" -s wireframe_up_half_speed="0.3" -s wireframe_bottom_delay="0" -s wireframe_top_delay="0" -s wireframe_flow_connection="100" -s wireframe_printspeed_flat="5" -s wireframe_printspeed_down="5" -s wireframe_printspeed_up="5" -s wireframe_printspeed_bottom="5" -s adaptive_layer_height_variation="0.1" -s flow_rate_extrusion_offset_factor="100" -s flow_rate_max_extrusion_offset="0" -s wipe_retraction_enable="true" -s magic_fuzzy_skin_point_dist="0.8" -s magic_fuzzy_skin_thickness="0.3" -s wireframe_flat_delay="0.1" -s magic_fuzzy_skin_enabled="false" -s support_conical_angle="30" -s support_conical_enabled="false" -s spaghetti_inset="0.2" -s spaghetti_max_height="2" -s spaghetti_infill_enabled="false" -s cross_infill_density_image="" -s cross_infill_pocket_size="2" -s coasting_speed="90" -s conical_overhang_enabled="false" -s draft_shield_height="10" -s draft_shield_height_limitation="full" -s draft_shield_dist="10" -s draft_shield_enabled="false" -s wipe_repeat_count="5" -s bridge_fan_speed_3="0" -s support_skip_some_zags="false" -s minimum_polygon_circumference="1" -s material_flow_dependent_temperature="false" -s roofing_pattern="lines" -s slicing_tolerance="middle" -s support_tree_collision_resolution="0.4" -s support_tree_branch_diameter_angle="5" -s support_tree_branch_distance="1" -s support_tree_angle="40" -s smooth_spiralized_contours="true" -s coasting_min_volume="0.8" -s magic_mesh_surface_mode="normal" -s mold_angle="40" -s mold_roof_height="0.5" -s mold_width="5" -s mold_enabled="false" -s cutting_mesh="false" -s meshfix_maximum_travel_resolution="1" -s meshfix_maximum_resolution="0.5" -s remove_empty_first_layers="true" -s alternate_carve_order="true" -s wireframe_height="3" -s ooze_shield_dist="2" -s ooze_shield_angle="60" -s prime_tower_position_y="200" -s prime_tower_position_x="200" -s prime_tower_min_volume="6" -s prime_tower_size="20" -s prime_tower_enable="false" -s raft_base_fan_speed="0" -s raft_interface_fan_speed="0" -s raft_base_jerk="20" -s raft_interface_jerk="20" -s wall_overhang_speed_factor="100" -s raft_base_acceleration="3000" -s raft_interface_acceleration="3000" -s cool_min_layer_time="5" -s material_break_preparation_speed="2" -s material_break_preparation_retracted_position="-16" -s material_anti_ooze_retraction_speed="5" -s material_crystallinity="false" -s raft_base_line_spacing="1.6" -s material_bed_temperature="60" -s default_material_bed_temperature="60" -s material_final_print_temperature="195" -s wall_x_material_flow="100" -s bridge_wall_coast="100" -s wall_0_material_flow="100" -s wall_line_count="2" -s coasting_enable="false" -s support_infill_sparse_thickness="0.1" -s default_material_print_temperature="210" -s material_surface_energy="100" -s cross_support_density_image="" -s switch_extruder_retraction_amount="20" -s raft_base_speed="15" -s skin_edge_support_layers="4" -s print_sequence="all_at_once" -s support_xy_distance_overhang="0.2" -s infill_support_enabled="false" -s infill_before_walls="true" -s infill_overlap_mm="0.04" -s sub_div_rad_add="0.4" -s infill_multiplier="1" -s zig_zaggify_infill="false" -s infill_pattern="grid" -s material_adhesion_tendency="10" -s support_tree_enable="false" -s skin_overlap_mm="0.02" -s machine_heat_zone_length="16" -s machine_max_jerk_e="5" -s acceleration_ironing="3000" -s speed_infill="60" -s speed_ironing="20" -s raft_surface_jerk="20" -s speed_z_hop="10" -s ironing_inset="0.35" -s ironing_line_spacing="0.1" -s retraction_hop_after_extruder_switch_height="1" -s material_initial_print_temperature="200" -s mesh_position_x="0" -s bridge_settings_enabled="false" -s ironing_only_highest_layer="false" -s meshfix_maximum_deviation="0.05" -s infill_wipe_dist="0.04" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s infill_line_width="0.4" -s roofing_material_flow="100" -s infill_wall_line_count="0" -s roofing_angles="[ ]" -s support_tree_branch_diameter="2" -s z_seam_corner="z_seam_corner_inner" -s infill_material_flow="100" -s z_seam_y="100" -s infill_support_angle="40" -s machine_firmware_retract="false" -s raft_surface_thickness="0.1" -s machine_nozzle_size="0.4" -s brim_line_count="20" -s ironing_enabled="false" -s support_zag_skip_count="5" -s skirt_gap="3" -s z_seam_x="100" -s xy_offset="0" -s wall_min_flow="0" -s prime_tower_line_width="0.4" -s filter_out_tiny_gaps="true" -s support_fan_enable="false" -s infill_sparse_thickness="0.1" -s support_mesh="false" -s travel_compensate_overlapping_walls_0_enabled="true" -s infill_extruder_nr="-1" -s wireframe_enabled="false" -s material_diameter="1.75" -s travel_compensate_overlapping_walls_x_enabled="true" -s support_bottom_material_flow="100" -s jerk_print_layer_0="20" -s bridge_wall_min_length="5" -s alternate_extra_perimeter="false" -s bridge_wall_speed="15" -s meshfix_union_all_remove_holes="false" -s xy_offset_layer_0="0" -s outer_inset_first="false" -s optimize_wall_printing_order="false" -s support_roof_line_width="0.4" -s wall_0_inset="0" -s top_layers="8" -s material_break_temperature="50" -s skin_angles="[ ]" -s prime_tower_brim_enable="false" -s bottom_layers="6" -s speed_wall_0="30" -s speed_support_infill="60" -s gradual_infill_steps="0" -s switch_extruder_extra_prime_amount="0" -s cool_fan_speed_min="100" -s acceleration_support_infill="3000" -s infill_mesh_order="0" -s cool_min_speed="10" -s machine_min_cool_heat_time_window="50" -s raft_surface_fan_speed="0" -s machine_filament_park_distance="16" -s z_seam_relative="false" -s initial_bottom_layers="6" -s extruder_prime_pos_abs="false" -s material_flow_layer_0="100" -s material_standby_temperature="150" -s ironing_pattern="zigzag" -s machine_heated_build_volume="false" -s top_skin_expand_distance="1" -s infill_randomize_start_location="false" -s layer_0_z_overlap="0.22" -s machine_nozzle_tip_outer_diameter="1" -s skin_no_small_gaps_heuristic="false" -s machine_height="370" -s machine_buildplate_type="glass" -s material_anti_ooze_retracted_position="-4" -s support_roof_angles="[ ]" -s layer_height_0="0.3" -s skirt_brim_speed="30" -s support_enable="false" -s machine_extruder_count="1" -s wipe_move_distance="20" -s skin_line_width="0.4" -s material_shrinkage_percentage="0" -s machine_name="Unknown" -s initial_layer_line_width_factor="100" -s top_skin_preshrink="1" -s bridge_fan_speed="100" -s ooze_shield_enabled="false" -s machine_center_is_zero="true" -s machine_nozzle_expansion_angle="45" -s extruder_prime_pos_z="0" -s connect_infill_polygons="true" -s infill_line_distance="2" -s material_guid="" -s support_conical_min_width="5" -s gradual_infill_step_height="1.5" -s material_bed_temp_wait="true" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="true" -s layer_start_y="0" -s material_break_speed="25" -s machine_show_variants="false" -s machine_nozzle_head_distance="3" -s skirt_brim_line_width="0.4" -s speed_support_bottom="40" -s support_type="everywhere" -s travel_avoid_distance="0.625" -s material_print_temperature_layer_0="215" -s material_bed_temperature_layer_0="60" -s roofing_layer_count="0" -s jerk_travel="30" -s machine_max_feedrate_z="2.99792e+11" -s min_skin_width_for_expansion="2.24" -s machine_acceleration="4000" -s machine_depth="260" -s support_connect_zigzags="true" -s support_bottom_offset="0" -s jerk_ironing="20" -s support_bottom_distance="0.1" -s infill_mesh="false" -s raft_margin="15" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_prepend="true" -s connect_skin_polygons="false" -s machine_max_acceleration_y="9000" -s machine_use_extruder_offset_to_offset_coords="true" -s machine_endstop_positive_direction_x="false" -s machine_nozzle_heat_up_speed="2" -s min_infill_area="0" -s layer_start_x="0" -s support_brim_enable="false" -s bottom_skin_preshrink="1" -s machine_nozzle_temp_enabled="true" -s skirt_line_count="1" -s support_tower_maximum_supported_diameter="3" -s machine_max_feedrate_x="2.99792e+11" -s machine_gcode_flavor="Repetier" -s material_extrusion_cool_down_speed="0.7" -s material_bed_temp_prepend="true" -s retraction_combing_max_distance="0" -s top_bottom_pattern="lines" -s machine_max_feedrate_y="2.99792e+11" -s support_mesh_drop_down="true" -s infill_offset_x="0" -s machine_max_acceleration_x="9000" -s fill_outline_gaps="false" -s coasting_volume="0.064" -s wall_x_extruder_nr="-1" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="false" -s gradual_support_infill_step_height="1" -s machine_max_acceleration_z="100" -s machine_start_gcode="G21
G90
M82
M107 T0
M190 S{material_bed_temperature}
M109 S{material_print_temperature} T0
G28
G92 E0
G0 E3 F200
G92 E0
" -s machine_max_acceleration_e="10000" -s mesh_position_z="0" -s speed_prime_tower="60" -s wall_line_width_0="0.4" -s raft_interface_speed="15" -s infill_offset_y="0" -s travel_avoid_supports="false" -s machine_steps_per_mm_x="50" -s switch_extruder_prime_speed="20" -s acceleration_wall_0="3000" -s ironing_flow="10" -s support_extruder_nr_layer_0="0" -s support_roof_extruder_nr="0" -s support_initial_layer_line_distance="2.66" -s machine_steps_per_mm_z="50" -s machine_extruders_share_heater="false" -s machine_steps_per_mm_e="1600" -s wall_0_extruder_nr="-1" -s spaghetti_infill_stepped="true" -s support_roof_material_flow="100" -s machine_endstop_positive_direction_z="true" -s machine_nozzle_cool_down_speed="2" -s machine_steps_per_mm_y="50" -s machine_minimum_feedrate="0" -s speed_wall_x="60" -s layer_height="0.1" -s wall_line_width_x="0.4" -s raft_surface_line_width="0.4" -s machine_feeder_wheel_diameter="10" -s infill_angles="[ ]" -s top_bottom_pattern_0="lines" -s machine_max_feedrate_e="2.99792e+11" -s cool_fan_speed_max="100" -s roofing_extruder_nr="-1" -s cool_min_layer_time_fan_speed_max="10" -s machine_max_jerk_xy="20" -s support_line_width="0.4" -s support_wall_count="1" -s support_bottom_line_width="0.4" -s anti_overhang_mesh="false" -s top_bottom_extruder_nr="-1" -s wireframe_roof_inset="3" -s skin_material_flow="100" -s retraction_count_max="90" -s skirt_brim_material_flow="100" -s retraction_combing="all" -s wipe_retraction_prime_speed="2" -s support_material_flow="100" -s machine_nozzle_id="unknown" -s support_bottom_pattern="concentric" -s prime_tower_flow="100" -s infill_sparse_density="10" -s retraction_enable="true" -s retract_at_layer_change="false" -s carve_multiple_volumes="true" -s fill_perimeter_gaps="everywhere" -s retraction_amount="6.5" -s retraction_retract_speed="25" -s material_print_temp_wait="true" -s support_bottom_height="1" -s gantry_height="1e+11" -s support_interface_skip_height="0.3" -s acceleration_enabled="false" -s z_seam_type="back" -s retraction_prime_speed="25" -s retraction_extra_prime_amount="0" -s retraction_min_travel="1.5" -s retraction_extrusion_window="4.5" -s bottom_skin_expand_distance="1" -s build_volume_temperature="0" -s switch_extruder_retraction_speed="20" -s speed_roofing="25" -s jerk_travel_layer_0="20" -s speed_topbottom="30" -s conical_overhang_angle="50" -s material_print_temperature="210" -s speed_support_roof="40" -s speed_travel="120" -s minimum_roof_area="1" -s speed_slowdown_layers="2" -s speed_equalize_flow_enabled="false" -s acceleration_infill="3000" -s acceleration_wall_x="3000" -s retraction_hop_enabled="false" -s acceleration_roofing="3000" -s skin_outline_count="1" -s acceleration_topbottom="3000" -s acceleration_support_roof="3000" -s acceleration_support_bottom="3000" -s machine_width="260" -s acceleration_travel_layer_0="3000" -s relative_extrusion="false" -s adhesion_extruder_nr="0" -s multiple_mesh_overlap="0.15" -s machine_max_jerk_z="0.4" -s acceleration_prime_tower="3000" -s support_pattern="zigzag" -s acceleration_travel="5000" -s limit_support_retractions="true" -s acceleration_print_layer_0="3000" -s support_offset="0" -s jerk_enabled="false" -s wall_min_flow_retract="false" -s jerk_infill="20" -s jerk_wall_0="20" -s jerk_wall_x="20" -s infill_enable_travel_optimization="false" -s cool_fan_full_layer="2" -s wipe_brush_pos_x="100" -s bridge_skin_speed="15" -s raft_surface_acceleration="3000" -s jerk_roofing="20" -s jerk_topbottom="20" -s support_use_towers="true" -s jerk_support_infill="20" -s wireframe_roof_drag_along="0.8" -s jerk_support_roof="20" -s support_tree_wall_count="1" -s extruders_enabled_count="1" -s extruder_prime_pos_y="0" -s jerk_support_bottom="20" -s adaptive_layer_height_threshold="0.2" -s support_roof_pattern="concentric" -s jerk_prime_tower="20" -s jerk_skirt_brim="20" -s wall_0_wipe_dist="0.2" -s travel_retract_before_outer_wall="false" -s speed_equalize_flow_max="150" -s support_infill_extruder_nr="0" -s travel_avoid_other_parts="true" -s retraction_hop_only_when_collides="false" -s retraction_hop="1" -s retraction_hop_after_extruder_switch="true" -s cool_fan_speed_0="0" -s cool_lift_head="false" -s speed_travel_layer_0="60" -s support_bottom_extruder_nr="0" -s support_angle="50" -s speed_print_layer_0="30" -s machine_shape="elliptic" -s support_line_distance="2.66" -s material_break_preparation_temperature="50" -s support_infill_angles="[ ]" -s support_xy_overrides_z="z_overrides_xy" -s skirt_brim_minimal_length="250" -s support_brim_line_count="20" -s support_top_distance="0.1" -s cool_fan_enabled="true" -s support_xy_distance="0.7" -s magic_spiralize="false" -s support_bottom_stair_step_height="0.3" -s machine_heated_bed="true" -s support_bottom_stair_step_width="5" -s support_join_distance="2" -s gradual_support_infill_steps="0" -s minimum_support_area="0" -s support_roof_enable="false" -s support_bottom_enable="false" -s support_roof_height="1" -s support_roof_line_distance="0.4" -s brim_outside_only="true" -s support_bottom_line_distance="0.4" -s meshfix_keep_open_polygons="false" -s minimum_bottom_area="1" -s support_roof_offset="0" -s support_bottom_angles="[ ]" -s wireframe_flow_flat="100" -s roofing_line_width="0.4" -s adhesion_type="brim" -s raft_base_line_width="0.8" -s support_supported_skin_fan_speed="100" -s support_tower_diameter="3" -s support_tower_roof_angle="65" -s prime_blob_enable="false" -s meshfix_union_all="true" -s extruder_prime_pos_x="0" -s brim_replaces_support="true" -s raft_smoothing="5" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s raft_surface_layers="2" -s material_break_retracted_position="-50" -s raft_surface_line_spacing="0.4" -s raft_interface_thickness="0.15" -s meshfix_extensive_stitching="false" -s acceleration_skirt_brim="3000" -s raft_interface_line_width="0.7" -s raft_interface_line_spacing="0.9" -s zig_zaggify_support="false" -s machine_end_gcode="M107 T0
M104 S0
M104 S0 T1
M140 S0
G92 E0
G91
G1 E-1 F300
G1 Z+0.5 E-5 X-20 Y-20 F9000
G28 X0 Y0
M84 ;steppers off
G90 ;absolute positioning
" -s raft_base_thickness="0.3" -s raft_surface_speed="20" -e0 -s machine_nozzle_offset_y="0" -s extruder_prime_pos_z="0" -s machine_nozzle_offset_x="0" -s extruder_nr="0" -s machine_extruder_end_pos_y="0" -s material_diameter="1.75" -s machine_nozzle_id="unknown" -s machine_nozzle_size="0.4" -s extruder_prime_pos_x="0" -s machine_extruder_start_pos_abs="false" -s machine_extruder_start_pos_y="0" -s machine_extruder_start_code="" -s machine_extruder_end_pos_x="0" -s machine_extruder_end_code="" -s extruder_prime_pos_y="0" -s machine_extruder_start_pos_x="0" -s machine_extruder_end_pos_abs="false" -s machine_extruder_cooling_fan_number="0" -g -e0 -l "0" -s acceleration_wall_x="3000" -s support_tower_diameter="3.0" -s wireframe_drag_along="0.6" -s material_shrinkage_percentage="0" -s material_break_temperature="50" -s optimize_wall_printing_order="False" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s support_tree_branch_distance="1" -s expand_skins_expand_distance="0.8" -s initial_layer_line_width_factor="100.0" -s support_interface_height="1" -s top_skin_preshrink="0.8" -s min_infill_area="0" -s machine_height="370" -s wall_0_inset="0" -s machine_acceleration="4000" -s support_bottom_pattern="concentric" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="False" -s magic_fuzzy_skin_thickness="0.3" -s jerk_support_bottom="20" -s machine_start_gcode="G21" -s support_initial_layer_line_distance="2.6666666666666665" -s wall_thickness="1" -s retraction_prime_speed="25" -s top_bottom_pattern="lines" -s z_seam_relative="False" -s speed_wall_0="40" -s bottom_skin_expand_distance="0.8" -s prime_blob_enable="False" -s machine_filament_park_distance="16" -s extruder_prime_pos_z="0" -s speed_wall="30.0" -s machine_max_acceleration_e="10000" -s skin_preshrink="0.8" -s machine_heated_bed="True" -s machine_show_variants="False" -s layer_height_0="0.3" -s raft_base_acceleration="3000" -s acceleration_print="3000" -s bridge_skin_density_2="75" -s support_bottom_angles="[ ]" -s magic_fuzzy_skin_enabled="False" -s layer_start_y="0.0" -s bridge_settings_enabled="False" -s support_interface_line_width="0.4" -s skirt_brim_line_width="0.4" -s machine_extruder_start_pos_x="0" -s extruder_nr="0" -s machine_extruder_end_pos_y="0" -s support_bottom_stair_step_height="0.3" -s material_diameter="1.75" -s support_fan_enable="False" -s machine_nozzle_id="unknown" -s machine_nozzle_size="0.4" -s extruder_prime_pos_x="0" -s machine_extruder_start_pos_abs="false" -s material_bed_temperature_layer_0="60" -s center_object="True" -s machine_depth="260" -s travel_retract_before_outer_wall="False" -s support_infill_extruder_nr="0" -s wall_min_flow_retract="False" -s machine_nozzle_expansion_angle="45" -s machine_extruder_start_code="" -s zig_zaggify_infill="False" -s skirt_line_count="1" -s infill_support_angle="40" -s raft_base_line_spacing="1.6" -s machine_extruder_end_pos_x="0" -s infill_offset_x="0" -s minimum_polygon_circumference="1.0" -s machine_extruder_end_code="" -s material_adhesion_tendency="10" -s jerk_layer_0="20" -s extruder_prime_pos_y="0" -s retraction_combing_max_distance="0" -s machine_extruder_end_pos_abs="false" -s raft_interface_jerk="20" -s material_print_temperature_layer_0="210" -s machine_extruder_cooling_fan_number="0" -s fill_perimeter_gaps="everywhere" -s roofing_layer_count="0" -s support_top_distance="0.1" -s xy_offset="0" -s travel_speed="120" -s day="Wed" -s acceleration_support_interface="3000" -s support_brim_enable="False" -s support_interface_skip_height="0.3" -s skin_line_width="0.4" -s material_break_retracted_position="-50" -s wireframe_printspeed="5" -s support_conical_min_width="5.0" -s speed_z_hop="10" -s switch_extruder_prime_speed="20" -s infill_material_flow="100" -s support_interface_pattern="concentric" -s machine_extruder_start_pos_y="0" -s retraction_amount="6.5" -s support_bottom_height="1" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s machine_max_jerk_z="0.4" -s wall_0_material_flow="100" -s wall_extruder_nr="-1" -s support_conical_angle="30" -s machine_nozzle_offset_x="0" -s raft_surface_fan_speed="0" -s machine_nozzle_heat_up_speed="2.0" -s material_break_preparation_retracted_position="-16" -s retraction_retract_speed="25" -s infill_sparse_density="10" -s raft_fan_speed="0" -s support_xy_distance="0.7" -s support_extruder_nr_layer_0="0" -s jerk_wall_x="20" -s extruder_prime_pos_abs="False" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s machine_nozzle_offset_y="0" -s machine_max_feedrate_x="299792458000" -s acceleration_infill="3000" -s wireframe_flow_connection="100" -s speed_support_bottom="40.0"
Progress: start accomplished in 0.000s
Starting slice...
Slicing model...
slice of mesh took 0.005 seconds
slice make polygons took 0.003 seconds
Progress: slice accomplished in 0.008s
Starting layerparts...
Progress: layerparts accomplished in 0.004s
Starting inset+skin...
Layer count: 200
Progress: inset+skin accomplished in 0.347s
Starting support...
Processing platform adhesion
Progress: support accomplished in 0.056s
Starting export...
Multithreading GcodeLayerThreader with 1 threads.
Progress: export accomplished in 0.440s
Total time elapsed  0.86s.
Gcode header after slicing:
;FLAVOR:Repetier
;TIME:1241
;MINX:-23.26
;MINY:-15.129
;MINZ:0.3
;MAXX:23.261
;MAXY:19.979
;MAXZ:20.2
End of gcode header.
Print time (s): 1241
Print time (hr|min|s): 0h 20m 41s
Filament (mm^3): 1462

 

[Looking for help with CuraEngine Slicing]

I'm pretty new to using CuraEngine. I'm trying to replicate slicing results from Cura using the same settings.

My printer is an FLSUN QQ-S, so I'm using a settings file I found in resources/definitions on the Cura repo from Github. I'm calling CuraEngine with this line:

"sys.argv[1]" is just the placeholder for the name of my .stl file

"settings.txt" is a text file where I've stored my settings I copied from Cura's log output

 

os.system('~/CuraEngine/build/CuraEngine slice -v -j flsun_qq_s.def.json -o output.gcode -l '+ sys.argv[1] +" "+ settings.read() + ' > out.txt 2>&1')

 

However, this doesn't produce the same gcode as running the same .stl file through Cura. Also, the resulting gcode doesn't function properly in the printer while the Cura generated gcode works perfectly.

 

I'm afraid my printer profile might be incorrect, or how I'm using it might be wrong?

 

I'm stumped since I've been changing around the settings I've stored in the settings file. I've tried all the -s entries from the log file or none.

My current settings file, along with the cura log that I've copied -s settings from. I'm also attaching the correct, Cura outputted, gcode (FQQS_Flattened_Lapras.gcode) and the faulty, CuraEngine outputted, gcode (output.gcode)

 

Any ideas or help would be appreciated.

 

Settings file contents:

-s skirt_brim_line_width="0.4" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s layer_start_y="0.0" -s wireframe_flow_connection="100" -s machine_show_variants="False" -s support_fan_enable="False" -s jerk_layer_0="20" -s bridge_skin_density_2="75" -s machine_nozzle_id="unknown" -s support_conical_min_width="5.0" -s layer_height_0="0.3" -s machine_max_acceleration_e="10000" -s material_bed_temperature_layer_0="60" -s day="Wed" -s support_bottom_stair_step_height="0.3" -s retraction_combing_max_distance="0" -s support_infill_extruder_nr="0" -s fill_perimeter_gaps="everywhere" -s support_top_distance="0.1" -s support_brim_enable="False" -s raft_base_acceleration="3000" -s travel_retract_before_outer_wall="False" -s switch_extruder_prime_speed="20" -s skin_preshrink="0.8" -s support_interface_skip_height="0.3" -s machine_heated_bed="True" -s raft_interface_jerk="20" -s skin_line_width="0.4" -s wireframe_printspeed="5" -s speed_z_hop="10" -s infill_sparse_density="10" -s bridge_settings_enabled="False" -s support_interface_pattern="concentric" -s retraction_amount="6.5" -s z_seam_corner="z_seam_corner_inner" -s machine_max_jerk_z="0.4" -s zig_zaggify_infill="False" -s support_conical_angle="30" -s machine_max_feedrate_x="299792458000" -s material_adhesion_tendency="10" -s raft_surface_fan_speed="0" -s xy_offset="0" -s material_break_preparation_retracted_position="-16" -s wall_0_material_flow="100" -s acceleration_print="3000" -s material_break_retracted_position="-50" -s retraction_retract_speed="25" -s machine_nozzle_heat_up_speed="2.0" -s extruder_prime_pos_x="0" -s acceleration_support_interface="3000" -s minimum_polygon_circumference="1.0" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s raft_fan_speed="0" -s acceleration_infill="3000" -s support_interface_angles="[ ]" -s speed_support_bottom="40.0" -s support_extruder_nr_layer_0="0" -s skirt_line_count="1" -s infill_material_flow="100" -s machine_filament_park_distance="16" -s support_bottom_height="1" -s prime_blob_enable="False" -s bottom_skin_expand_distance="0.8" -s extruder_prime_pos_y="0" -s wall_extruder_nr="-1" -s z_seam_relative="False" -s top_bottom_pattern="lines" -s machine_nozzle_expansion_angle="45" -s raft_base_line_spacing="1.6" -s retraction_prime_speed="25" -s support_initial_layer_line_distance="2.6666666666666665" -s jerk_support_bottom="20" -s magic_fuzzy_skin_thickness="0.3" -s alternate_extra_perimeter="False" -s gradual_support_infill_step_height="1" -s support_bottom_pattern="concentric" -s machine_depth="260" -s machine_acceleration="4000" -s wall_0_inset="0" -s machine_height="370" -s wall_thickness="1" -s min_infill_area="0" -s material_print_temperature_layer_0="210" -s top_skin_preshrink="0.8" -s extruder_prime_pos_abs="False" -s speed_wall="30.0" -s speed_wall_0="40" -s support_interface_height="1" -s initial_layer_line_width_factor="100.0" -s support_xy_distance="0.7" -s wall_min_flow_retract="False" -s expand_skins_expand_distance="0.8" -s support_tree_branch_distance="1" -s skin_no_small_gaps_heuristic="False" -s support_tree_collision_resolution="0.2" -s jerk_wall_x="20" -s optimize_wall_printing_order="False" -s material_break_temperature="50" -s travel_speed="120" -s material_shrinkage_percentage="0" -s wireframe_drag_along="0.6" -s roofing_layer_count="0" -s support_tower_diameter="3.0" -s acceleration_wall_x="3000" -s magic_fuzzy_skin_enabled="False" -s infill_offset_x="0" -s infill_support_angle="40" -s machine_start_gcode="G21"

 

 

cura.log FQQS_Flattened_Lapras.gcode output.gcode