Jump to content

reomalley16

Dormant
  • Posts

    2
  • Joined

  • Last visited

reomalley16's Achievements

0

Reputation

  1. I can provide the .stl for this file if that'll help too, but here is the -v output from CuraEngine during the slicing process: Cura_SteamEngine version master Copyright (C) 2019 Ultimaker This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details. You should have received a copy of the GNU Affero General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. [WARNING] Unrecognized data type in JSON setting machine_disallowed_areas [WARNING] Unrecognized data type in JSON setting nozzle_disallowed_areas [WARNING] Unrecognized data type in JSON setting machine_head_with_fans_polygon [WARNING] JSON setting gantry_height has no default_value! [WARNING] Unrecognized data type in JSON setting machine_head_with_fans_polygon loading 'Flattened_Lapras.stl' took 0.001 seconds Loaded from disk in 0.006s [WARNING] -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s mesh_position_y="0" -s center_object="false" -s small_feature_speed_factor_0="50" -s small_feature_speed_factor="50" -s small_feature_max_length="0" -s wipe_hop_speed="10" -s wipe_hop_amount="1" -s wipe_hop_enable="true" -s wipe_pause="0" -s wipe_retraction_retract_speed="3" -s wipe_retraction_amount="1" -s max_extrusion_before_wipe="10" -s clean_between_layers="false" -s wipe_retraction_extra_prime_amount="0" -s bridge_skin_density_3="80" -s bridge_skin_material_flow_3="110" -s bridge_skin_speed_3="15" -s bridge_fan_speed_2="0" -s bridge_skin_density_2="75" -s bridge_skin_speed_2="25" -s bridge_enable_more_layers="true" -s bridge_skin_density="100" -s bridge_wall_material_flow="50" -s bridge_sparse_infill_max_density="0" -s bridge_skin_support_threshold="50" -s wall_overhang_angle="90" -s adaptive_layer_height_variation_step="0.01" -s adaptive_layer_height_enabled="false" -s wireframe_nozzle_clearance="1" -s wireframe_roof_outer_delay="0.2" -s wireframe_roof_fall_down="2" -s wireframe_straight_before_down="20" -s wireframe_strategy="compensate" -s wireframe_drag_along="0.6" -s wireframe_fall_down="0.5" -s wireframe_top_jump="0.6" -s wireframe_up_half_speed="0.3" -s wireframe_bottom_delay="0" -s wireframe_top_delay="0" -s wireframe_flow_connection="100" -s wireframe_printspeed_flat="5" -s wireframe_printspeed_down="5" -s wireframe_printspeed_up="5" -s wireframe_printspeed_bottom="5" -s adaptive_layer_height_variation="0.1" -s flow_rate_extrusion_offset_factor="100" -s flow_rate_max_extrusion_offset="0" -s wipe_retraction_enable="true" -s magic_fuzzy_skin_point_dist="0.8" -s magic_fuzzy_skin_thickness="0.3" -s wireframe_flat_delay="0.1" -s magic_fuzzy_skin_enabled="false" -s support_conical_angle="30" -s support_conical_enabled="false" -s spaghetti_inset="0.2" -s spaghetti_max_height="2" -s spaghetti_infill_enabled="false" -s cross_infill_density_image="" -s cross_infill_pocket_size="2" -s coasting_speed="90" -s conical_overhang_enabled="false" -s draft_shield_height="10" -s draft_shield_height_limitation="full" -s draft_shield_dist="10" -s draft_shield_enabled="false" -s wipe_repeat_count="5" -s bridge_fan_speed_3="0" -s support_skip_some_zags="false" -s minimum_polygon_circumference="1" -s material_flow_dependent_temperature="false" -s roofing_pattern="lines" -s slicing_tolerance="middle" -s support_tree_collision_resolution="0.4" -s support_tree_branch_diameter_angle="5" -s support_tree_branch_distance="1" -s support_tree_angle="40" -s smooth_spiralized_contours="true" -s coasting_min_volume="0.8" -s magic_mesh_surface_mode="normal" -s mold_angle="40" -s mold_roof_height="0.5" -s mold_width="5" -s mold_enabled="false" -s cutting_mesh="false" -s meshfix_maximum_travel_resolution="1" -s meshfix_maximum_resolution="0.5" -s remove_empty_first_layers="true" -s alternate_carve_order="true" -s wireframe_height="3" -s ooze_shield_dist="2" -s ooze_shield_angle="60" -s prime_tower_position_y="200" -s prime_tower_position_x="200" -s prime_tower_min_volume="6" -s prime_tower_size="20" -s prime_tower_enable="false" -s raft_base_fan_speed="0" -s raft_interface_fan_speed="0" -s raft_base_jerk="20" -s raft_interface_jerk="20" -s wall_overhang_speed_factor="100" -s raft_base_acceleration="3000" -s raft_interface_acceleration="3000" -s cool_min_layer_time="5" -s material_break_preparation_speed="2" -s material_break_preparation_retracted_position="-16" -s material_anti_ooze_retraction_speed="5" -s material_crystallinity="false" -s raft_base_line_spacing="1.6" -s material_bed_temperature="60" -s default_material_bed_temperature="60" -s material_final_print_temperature="195" -s wall_x_material_flow="100" -s bridge_wall_coast="100" -s wall_0_material_flow="100" -s wall_line_count="2" -s coasting_enable="false" -s support_infill_sparse_thickness="0.1" -s default_material_print_temperature="210" -s material_surface_energy="100" -s cross_support_density_image="" -s switch_extruder_retraction_amount="20" -s raft_base_speed="15" -s skin_edge_support_layers="4" -s print_sequence="all_at_once" -s support_xy_distance_overhang="0.2" -s infill_support_enabled="false" -s infill_before_walls="true" -s infill_overlap_mm="0.04" -s sub_div_rad_add="0.4" -s infill_multiplier="1" -s zig_zaggify_infill="false" -s infill_pattern="grid" -s material_adhesion_tendency="10" -s support_tree_enable="false" -s skin_overlap_mm="0.02" -s machine_heat_zone_length="16" -s machine_max_jerk_e="5" -s acceleration_ironing="3000" -s speed_infill="60" -s speed_ironing="20" -s raft_surface_jerk="20" -s speed_z_hop="10" -s ironing_inset="0.35" -s ironing_line_spacing="0.1" -s retraction_hop_after_extruder_switch_height="1" -s material_initial_print_temperature="200" -s mesh_position_x="0" -s bridge_settings_enabled="false" -s ironing_only_highest_layer="false" -s meshfix_maximum_deviation="0.05" -s infill_wipe_dist="0.04" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s infill_line_width="0.4" -s roofing_material_flow="100" -s infill_wall_line_count="0" -s roofing_angles="[ ]" -s support_tree_branch_diameter="2" -s z_seam_corner="z_seam_corner_inner" -s infill_material_flow="100" -s z_seam_y="100" -s infill_support_angle="40" -s machine_firmware_retract="false" -s raft_surface_thickness="0.1" -s machine_nozzle_size="0.4" -s brim_line_count="20" -s ironing_enabled="false" -s support_zag_skip_count="5" -s skirt_gap="3" -s z_seam_x="100" -s xy_offset="0" -s wall_min_flow="0" -s prime_tower_line_width="0.4" -s filter_out_tiny_gaps="true" -s support_fan_enable="false" -s infill_sparse_thickness="0.1" -s support_mesh="false" -s travel_compensate_overlapping_walls_0_enabled="true" -s infill_extruder_nr="-1" -s wireframe_enabled="false" -s material_diameter="1.75" -s travel_compensate_overlapping_walls_x_enabled="true" -s support_bottom_material_flow="100" -s jerk_print_layer_0="20" -s bridge_wall_min_length="5" -s alternate_extra_perimeter="false" -s bridge_wall_speed="15" -s meshfix_union_all_remove_holes="false" -s xy_offset_layer_0="0" -s outer_inset_first="false" -s optimize_wall_printing_order="false" -s support_roof_line_width="0.4" -s wall_0_inset="0" -s top_layers="8" -s material_break_temperature="50" -s skin_angles="[ ]" -s prime_tower_brim_enable="false" -s bottom_layers="6" -s speed_wall_0="30" -s speed_support_infill="60" -s gradual_infill_steps="0" -s switch_extruder_extra_prime_amount="0" -s cool_fan_speed_min="100" -s acceleration_support_infill="3000" -s infill_mesh_order="0" -s cool_min_speed="10" -s machine_min_cool_heat_time_window="50" -s raft_surface_fan_speed="0" -s machine_filament_park_distance="16" -s z_seam_relative="false" -s initial_bottom_layers="6" -s extruder_prime_pos_abs="false" -s material_flow_layer_0="100" -s material_standby_temperature="150" -s ironing_pattern="zigzag" -s machine_heated_build_volume="false" -s top_skin_expand_distance="1" -s infill_randomize_start_location="false" -s layer_0_z_overlap="0.22" -s machine_nozzle_tip_outer_diameter="1" -s skin_no_small_gaps_heuristic="false" -s machine_height="370" -s machine_buildplate_type="glass" -s material_anti_ooze_retracted_position="-4" -s support_roof_angles="[ ]" -s layer_height_0="0.3" -s skirt_brim_speed="30" -s support_enable="false" -s machine_extruder_count="1" -s wipe_move_distance="20" -s skin_line_width="0.4" -s material_shrinkage_percentage="0" -s machine_name="Unknown" -s initial_layer_line_width_factor="100" -s top_skin_preshrink="1" -s bridge_fan_speed="100" -s ooze_shield_enabled="false" -s machine_center_is_zero="true" -s machine_nozzle_expansion_angle="45" -s extruder_prime_pos_z="0" -s connect_infill_polygons="true" -s infill_line_distance="2" -s material_guid="" -s support_conical_min_width="5" -s gradual_infill_step_height="1.5" -s material_bed_temp_wait="true" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="true" -s layer_start_y="0" -s material_break_speed="25" -s machine_show_variants="false" -s machine_nozzle_head_distance="3" -s skirt_brim_line_width="0.4" -s speed_support_bottom="40" -s support_type="everywhere" -s travel_avoid_distance="0.625" -s material_print_temperature_layer_0="215" -s material_bed_temperature_layer_0="60" -s roofing_layer_count="0" -s jerk_travel="30" -s machine_max_feedrate_z="2.99792e+11" -s min_skin_width_for_expansion="2.24" -s machine_acceleration="4000" -s machine_depth="260" -s support_connect_zigzags="true" -s support_bottom_offset="0" -s jerk_ironing="20" -s support_bottom_distance="0.1" -s infill_mesh="false" -s raft_margin="15" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_prepend="true" -s connect_skin_polygons="false" -s machine_max_acceleration_y="9000" -s machine_use_extruder_offset_to_offset_coords="true" -s machine_endstop_positive_direction_x="false" -s machine_nozzle_heat_up_speed="2" -s min_infill_area="0" -s layer_start_x="0" -s support_brim_enable="false" -s bottom_skin_preshrink="1" -s machine_nozzle_temp_enabled="true" -s skirt_line_count="1" -s support_tower_maximum_supported_diameter="3" -s machine_max_feedrate_x="2.99792e+11" -s machine_gcode_flavor="Repetier" -s material_extrusion_cool_down_speed="0.7" -s material_bed_temp_prepend="true" -s retraction_combing_max_distance="0" -s top_bottom_pattern="lines" -s machine_max_feedrate_y="2.99792e+11" -s support_mesh_drop_down="true" -s infill_offset_x="0" -s machine_max_acceleration_x="9000" -s fill_outline_gaps="false" -s coasting_volume="0.064" -s wall_x_extruder_nr="-1" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="false" -s gradual_support_infill_step_height="1" -s machine_max_acceleration_z="100" -s machine_start_gcode="G21 G90 M82 M107 T0 M190 S{material_bed_temperature} M109 S{material_print_temperature} T0 G28 G92 E0 G0 E3 F200 G92 E0 " -s machine_max_acceleration_e="10000" -s mesh_position_z="0" -s speed_prime_tower="60" -s wall_line_width_0="0.4" -s raft_interface_speed="15" -s infill_offset_y="0" -s travel_avoid_supports="false" -s machine_steps_per_mm_x="50" -s switch_extruder_prime_speed="20" -s acceleration_wall_0="3000" -s ironing_flow="10" -s support_extruder_nr_layer_0="0" -s support_roof_extruder_nr="0" -s support_initial_layer_line_distance="2.66" -s machine_steps_per_mm_z="50" -s machine_extruders_share_heater="false" -s machine_steps_per_mm_e="1600" -s wall_0_extruder_nr="-1" -s spaghetti_infill_stepped="true" -s support_roof_material_flow="100" -s machine_endstop_positive_direction_z="true" -s machine_nozzle_cool_down_speed="2" -s machine_steps_per_mm_y="50" -s machine_minimum_feedrate="0" -s speed_wall_x="60" -s layer_height="0.1" -s wall_line_width_x="0.4" -s raft_surface_line_width="0.4" -s machine_feeder_wheel_diameter="10" -s infill_angles="[ ]" -s top_bottom_pattern_0="lines" -s machine_max_feedrate_e="2.99792e+11" -s cool_fan_speed_max="100" -s roofing_extruder_nr="-1" -s cool_min_layer_time_fan_speed_max="10" -s machine_max_jerk_xy="20" -s support_line_width="0.4" -s support_wall_count="1" -s support_bottom_line_width="0.4" -s anti_overhang_mesh="false" -s top_bottom_extruder_nr="-1" -s wireframe_roof_inset="3" -s skin_material_flow="100" -s retraction_count_max="90" -s skirt_brim_material_flow="100" -s retraction_combing="all" -s wipe_retraction_prime_speed="2" -s support_material_flow="100" -s machine_nozzle_id="unknown" -s support_bottom_pattern="concentric" -s prime_tower_flow="100" -s infill_sparse_density="10" -s retraction_enable="true" -s retract_at_layer_change="false" -s carve_multiple_volumes="true" -s fill_perimeter_gaps="everywhere" -s retraction_amount="6.5" -s retraction_retract_speed="25" -s material_print_temp_wait="true" -s support_bottom_height="1" -s gantry_height="1e+11" -s support_interface_skip_height="0.3" -s acceleration_enabled="false" -s z_seam_type="back" -s retraction_prime_speed="25" -s retraction_extra_prime_amount="0" -s retraction_min_travel="1.5" -s retraction_extrusion_window="4.5" -s bottom_skin_expand_distance="1" -s build_volume_temperature="0" -s switch_extruder_retraction_speed="20" -s speed_roofing="25" -s jerk_travel_layer_0="20" -s speed_topbottom="30" -s conical_overhang_angle="50" -s material_print_temperature="210" -s speed_support_roof="40" -s speed_travel="120" -s minimum_roof_area="1" -s speed_slowdown_layers="2" -s speed_equalize_flow_enabled="false" -s acceleration_infill="3000" -s acceleration_wall_x="3000" -s retraction_hop_enabled="false" -s acceleration_roofing="3000" -s skin_outline_count="1" -s acceleration_topbottom="3000" -s acceleration_support_roof="3000" -s acceleration_support_bottom="3000" -s machine_width="260" -s acceleration_travel_layer_0="3000" -s relative_extrusion="false" -s adhesion_extruder_nr="0" -s multiple_mesh_overlap="0.15" -s machine_max_jerk_z="0.4" -s acceleration_prime_tower="3000" -s support_pattern="zigzag" -s acceleration_travel="5000" -s limit_support_retractions="true" -s acceleration_print_layer_0="3000" -s support_offset="0" -s jerk_enabled="false" -s wall_min_flow_retract="false" -s jerk_infill="20" -s jerk_wall_0="20" -s jerk_wall_x="20" -s infill_enable_travel_optimization="false" -s cool_fan_full_layer="2" -s wipe_brush_pos_x="100" -s bridge_skin_speed="15" -s raft_surface_acceleration="3000" -s jerk_roofing="20" -s jerk_topbottom="20" -s support_use_towers="true" -s jerk_support_infill="20" -s wireframe_roof_drag_along="0.8" -s jerk_support_roof="20" -s support_tree_wall_count="1" -s extruders_enabled_count="1" -s extruder_prime_pos_y="0" -s jerk_support_bottom="20" -s adaptive_layer_height_threshold="0.2" -s support_roof_pattern="concentric" -s jerk_prime_tower="20" -s jerk_skirt_brim="20" -s wall_0_wipe_dist="0.2" -s travel_retract_before_outer_wall="false" -s speed_equalize_flow_max="150" -s support_infill_extruder_nr="0" -s travel_avoid_other_parts="true" -s retraction_hop_only_when_collides="false" -s retraction_hop="1" -s retraction_hop_after_extruder_switch="true" -s cool_fan_speed_0="0" -s cool_lift_head="false" -s speed_travel_layer_0="60" -s support_bottom_extruder_nr="0" -s support_angle="50" -s speed_print_layer_0="30" -s machine_shape="elliptic" -s support_line_distance="2.66" -s material_break_preparation_temperature="50" -s support_infill_angles="[ ]" -s support_xy_overrides_z="z_overrides_xy" -s skirt_brim_minimal_length="250" -s support_brim_line_count="20" -s support_top_distance="0.1" -s cool_fan_enabled="true" -s support_xy_distance="0.7" -s magic_spiralize="false" -s support_bottom_stair_step_height="0.3" -s machine_heated_bed="true" -s support_bottom_stair_step_width="5" -s support_join_distance="2" -s gradual_support_infill_steps="0" -s minimum_support_area="0" -s support_roof_enable="false" -s support_bottom_enable="false" -s support_roof_height="1" -s support_roof_line_distance="0.4" -s brim_outside_only="true" -s support_bottom_line_distance="0.4" -s meshfix_keep_open_polygons="false" -s minimum_bottom_area="1" -s support_roof_offset="0" -s support_bottom_angles="[ ]" -s wireframe_flow_flat="100" -s roofing_line_width="0.4" -s adhesion_type="brim" -s raft_base_line_width="0.8" -s support_supported_skin_fan_speed="100" -s support_tower_diameter="3" -s support_tower_roof_angle="65" -s prime_blob_enable="false" -s meshfix_union_all="true" -s extruder_prime_pos_x="0" -s brim_replaces_support="true" -s raft_smoothing="5" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s raft_surface_layers="2" -s material_break_retracted_position="-50" -s raft_surface_line_spacing="0.4" -s raft_interface_thickness="0.15" -s meshfix_extensive_stitching="false" -s acceleration_skirt_brim="3000" -s raft_interface_line_width="0.7" -s raft_interface_line_spacing="0.9" -s zig_zaggify_support="false" -s machine_end_gcode="M107 T0 M104 S0 M104 S0 T1 M140 S0 G92 E0 G91 G1 E-1 F300 G1 Z+0.5 E-5 X-20 Y-20 F9000 G28 X0 Y0 M84 ;steppers off G90 ;absolute positioning " -s raft_base_thickness="0.3" -s raft_surface_speed="20" -e0 -s machine_nozzle_offset_y="0" -s extruder_prime_pos_z="0" -s machine_nozzle_offset_x="0" -s extruder_nr="0" -s machine_extruder_end_pos_y="0" -s material_diameter="1.75" -s machine_nozzle_id="unknown" -s machine_nozzle_size="0.4" -s extruder_prime_pos_x="0" -s machine_extruder_start_pos_abs="false" -s machine_extruder_start_pos_y="0" -s machine_extruder_start_code="" -s machine_extruder_end_pos_x="0" -s machine_extruder_end_code="" -s extruder_prime_pos_y="0" -s machine_extruder_start_pos_x="0" -s machine_extruder_end_pos_abs="false" -s machine_extruder_cooling_fan_number="0" -g -e0 -l "0" -s acceleration_wall_x="3000" -s support_tower_diameter="3.0" -s wireframe_drag_along="0.6" -s material_shrinkage_percentage="0" -s material_break_temperature="50" -s optimize_wall_printing_order="False" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s support_tree_branch_distance="1" -s expand_skins_expand_distance="0.8" -s initial_layer_line_width_factor="100.0" -s support_interface_height="1" -s top_skin_preshrink="0.8" -s min_infill_area="0" -s machine_height="370" -s wall_0_inset="0" -s machine_acceleration="4000" -s support_bottom_pattern="concentric" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="False" -s magic_fuzzy_skin_thickness="0.3" -s jerk_support_bottom="20" -s machine_start_gcode="G21" -s support_initial_layer_line_distance="2.6666666666666665" -s wall_thickness="1" -s retraction_prime_speed="25" -s top_bottom_pattern="lines" -s z_seam_relative="False" -s speed_wall_0="40" -s bottom_skin_expand_distance="0.8" -s prime_blob_enable="False" -s machine_filament_park_distance="16" -s extruder_prime_pos_z="0" -s speed_wall="30.0" -s machine_max_acceleration_e="10000" -s skin_preshrink="0.8" -s machine_heated_bed="True" -s machine_show_variants="False" -s layer_height_0="0.3" -s raft_base_acceleration="3000" -s acceleration_print="3000" -s bridge_skin_density_2="75" -s support_bottom_angles="[ ]" -s magic_fuzzy_skin_enabled="False" -s layer_start_y="0.0" -s bridge_settings_enabled="False" -s support_interface_line_width="0.4" -s skirt_brim_line_width="0.4" -s machine_extruder_start_pos_x="0" -s extruder_nr="0" -s machine_extruder_end_pos_y="0" -s support_bottom_stair_step_height="0.3" -s material_diameter="1.75" -s support_fan_enable="False" -s machine_nozzle_id="unknown" -s machine_nozzle_size="0.4" -s extruder_prime_pos_x="0" -s machine_extruder_start_pos_abs="false" -s material_bed_temperature_layer_0="60" -s center_object="True" -s machine_depth="260" -s travel_retract_before_outer_wall="False" -s support_infill_extruder_nr="0" -s wall_min_flow_retract="False" -s machine_nozzle_expansion_angle="45" -s machine_extruder_start_code="" -s zig_zaggify_infill="False" -s skirt_line_count="1" -s infill_support_angle="40" -s raft_base_line_spacing="1.6" -s machine_extruder_end_pos_x="0" -s infill_offset_x="0" -s minimum_polygon_circumference="1.0" -s machine_extruder_end_code="" -s material_adhesion_tendency="10" -s jerk_layer_0="20" -s extruder_prime_pos_y="0" -s retraction_combing_max_distance="0" -s machine_extruder_end_pos_abs="false" -s raft_interface_jerk="20" -s material_print_temperature_layer_0="210" -s machine_extruder_cooling_fan_number="0" -s fill_perimeter_gaps="everywhere" -s roofing_layer_count="0" -s support_top_distance="0.1" -s xy_offset="0" -s travel_speed="120" -s day="Wed" -s acceleration_support_interface="3000" -s support_brim_enable="False" -s support_interface_skip_height="0.3" -s skin_line_width="0.4" -s material_break_retracted_position="-50" -s wireframe_printspeed="5" -s support_conical_min_width="5.0" -s speed_z_hop="10" -s switch_extruder_prime_speed="20" -s infill_material_flow="100" -s support_interface_pattern="concentric" -s machine_extruder_start_pos_y="0" -s retraction_amount="6.5" -s support_bottom_height="1" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s machine_max_jerk_z="0.4" -s wall_0_material_flow="100" -s wall_extruder_nr="-1" -s support_conical_angle="30" -s machine_nozzle_offset_x="0" -s raft_surface_fan_speed="0" -s machine_nozzle_heat_up_speed="2.0" -s material_break_preparation_retracted_position="-16" -s retraction_retract_speed="25" -s infill_sparse_density="10" -s raft_fan_speed="0" -s support_xy_distance="0.7" -s support_extruder_nr_layer_0="0" -s jerk_wall_x="20" -s extruder_prime_pos_abs="False" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s machine_nozzle_offset_y="0" -s machine_max_feedrate_x="299792458000" -s acceleration_infill="3000" -s wireframe_flow_connection="100" -s speed_support_bottom="40.0" Progress: start accomplished in 0.000s Starting slice... Slicing model... slice of mesh took 0.005 seconds slice make polygons took 0.003 seconds Progress: slice accomplished in 0.008s Starting layerparts... Progress: layerparts accomplished in 0.004s Starting inset+skin... Layer count: 200 Progress: inset+skin accomplished in 0.347s Starting support... Processing platform adhesion Progress: support accomplished in 0.056s Starting export... Multithreading GcodeLayerThreader with 1 threads. Progress: export accomplished in 0.440s Total time elapsed 0.86s. Gcode header after slicing: ;FLAVOR:Repetier ;TIME:1241 ;MINX:-23.26 ;MINY:-15.129 ;MINZ:0.3 ;MAXX:23.261 ;MAXY:19.979 ;MAXZ:20.2 End of gcode header. Print time (s): 1241 Print time (hr|min|s): 0h 20m 41s Filament (mm^3): 1462
  2. I'm pretty new to using CuraEngine. I'm trying to replicate slicing results from Cura using the same settings. My printer is an FLSUN QQ-S, so I'm using a settings file I found in resources/definitions on the Cura repo from Github. I'm calling CuraEngine with this line: "sys.argv[1]" is just the placeholder for the name of my .stl file "settings.txt" is a text file where I've stored my settings I copied from Cura's log output os.system('~/CuraEngine/build/CuraEngine slice -v -j flsun_qq_s.def.json -o output.gcode -l '+ sys.argv[1] +" "+ settings.read() + ' > out.txt 2>&1') However, this doesn't produce the same gcode as running the same .stl file through Cura. Also, the resulting gcode doesn't function properly in the printer while the Cura generated gcode works perfectly. I'm afraid my printer profile might be incorrect, or how I'm using it might be wrong? I'm stumped since I've been changing around the settings I've stored in the settings file. I've tried all the -s entries from the log file or none. My current settings file, along with the cura log that I've copied -s settings from. I'm also attaching the correct, Cura outputted, gcode (FQQS_Flattened_Lapras.gcode) and the faulty, CuraEngine outputted, gcode (output.gcode) Any ideas or help would be appreciated. Settings file contents: -s skirt_brim_line_width="0.4" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s layer_start_y="0.0" -s wireframe_flow_connection="100" -s machine_show_variants="False" -s support_fan_enable="False" -s jerk_layer_0="20" -s bridge_skin_density_2="75" -s machine_nozzle_id="unknown" -s support_conical_min_width="5.0" -s layer_height_0="0.3" -s machine_max_acceleration_e="10000" -s material_bed_temperature_layer_0="60" -s day="Wed" -s support_bottom_stair_step_height="0.3" -s retraction_combing_max_distance="0" -s support_infill_extruder_nr="0" -s fill_perimeter_gaps="everywhere" -s support_top_distance="0.1" -s support_brim_enable="False" -s raft_base_acceleration="3000" -s travel_retract_before_outer_wall="False" -s switch_extruder_prime_speed="20" -s skin_preshrink="0.8" -s support_interface_skip_height="0.3" -s machine_heated_bed="True" -s raft_interface_jerk="20" -s skin_line_width="0.4" -s wireframe_printspeed="5" -s speed_z_hop="10" -s infill_sparse_density="10" -s bridge_settings_enabled="False" -s support_interface_pattern="concentric" -s retraction_amount="6.5" -s z_seam_corner="z_seam_corner_inner" -s machine_max_jerk_z="0.4" -s zig_zaggify_infill="False" -s support_conical_angle="30" -s machine_max_feedrate_x="299792458000" -s material_adhesion_tendency="10" -s raft_surface_fan_speed="0" -s xy_offset="0" -s material_break_preparation_retracted_position="-16" -s wall_0_material_flow="100" -s acceleration_print="3000" -s material_break_retracted_position="-50" -s retraction_retract_speed="25" -s machine_nozzle_heat_up_speed="2.0" -s extruder_prime_pos_x="0" -s acceleration_support_interface="3000" -s minimum_polygon_circumference="1.0" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s raft_fan_speed="0" -s acceleration_infill="3000" -s support_interface_angles="[ ]" -s speed_support_bottom="40.0" -s support_extruder_nr_layer_0="0" -s skirt_line_count="1" -s infill_material_flow="100" -s machine_filament_park_distance="16" -s support_bottom_height="1" -s prime_blob_enable="False" -s bottom_skin_expand_distance="0.8" -s extruder_prime_pos_y="0" -s wall_extruder_nr="-1" -s z_seam_relative="False" -s top_bottom_pattern="lines" -s machine_nozzle_expansion_angle="45" -s raft_base_line_spacing="1.6" -s retraction_prime_speed="25" -s support_initial_layer_line_distance="2.6666666666666665" -s jerk_support_bottom="20" -s magic_fuzzy_skin_thickness="0.3" -s alternate_extra_perimeter="False" -s gradual_support_infill_step_height="1" -s support_bottom_pattern="concentric" -s machine_depth="260" -s machine_acceleration="4000" -s wall_0_inset="0" -s machine_height="370" -s wall_thickness="1" -s min_infill_area="0" -s material_print_temperature_layer_0="210" -s top_skin_preshrink="0.8" -s extruder_prime_pos_abs="False" -s speed_wall="30.0" -s speed_wall_0="40" -s support_interface_height="1" -s initial_layer_line_width_factor="100.0" -s support_xy_distance="0.7" -s wall_min_flow_retract="False" -s expand_skins_expand_distance="0.8" -s support_tree_branch_distance="1" -s skin_no_small_gaps_heuristic="False" -s support_tree_collision_resolution="0.2" -s jerk_wall_x="20" -s optimize_wall_printing_order="False" -s material_break_temperature="50" -s travel_speed="120" -s material_shrinkage_percentage="0" -s wireframe_drag_along="0.6" -s roofing_layer_count="0" -s support_tower_diameter="3.0" -s acceleration_wall_x="3000" -s magic_fuzzy_skin_enabled="False" -s infill_offset_x="0" -s infill_support_angle="40" -s machine_start_gcode="G21" cura.log FQQS_Flattened_Lapras.gcode output.gcode
×
×
  • Create New...